Type: Posts; User: jmandtc
Looking for a wire diagram for york unit. Thanks.
Ok...but if heat start and runs in test mode I would think the problem would be something related to the intelepak board......but I'm not speaking from experience. Just don't know what to look at a...
I found a unit in heat failure. I cycled the heat with no problems.....tried to clear unit using password but would not clear fault.....any suggestions? Thanks.
My company picked up a new account with a couple of these trane air handlers.....Looking to see if anyone has a manual they can send me. Thanks.
Working on a Amana rcb36b2d. P1223311c compressorc15.3 rla 82 lra fan 1.7 rla Can't read compressor mf values....fan is 5 mf. Anyone know mf for compressor. Thanks.
I updated my profile.......appreciate any info.
I am working on a york split system. AH model is 3E4180A33A and the condenser is a H1CE150A46C. It is a 2 pipe system, tandem compressors. The unit has problem cooling space in the afternoon........
On a Carrier 50HJQO14 600SA S/N 0601F62130 I Noticed a 24volt resettable had tripped on cb4. I did take wires of the loads in the circuit and each time I turned on power the reset would trip. I...
Check tubing for blower switch. It may be out of position and not be able to sense draft of blower motor...
Do you just want the Batteries???
I have two batteries, charger, Flashlight( needs bulb), case and a drill that doesn't work for sale. I'm in the Bergen County, NJ area.
I'm interested but my financial situation is not that good right now.....
I was hoping for some overtime but nothing is coming my way...Sorry. Jim P.
Have you performed a vacuum test on the pump recently. If so how many microns did it pull down to. Thanks, Jim Peckio
Is the pump still available
I am considering buying the above system to isolate my micron gauge from system. . I especially would like to use it on residential split systems. Any feedback would be appreciated. Thanks.
I have the same micron gauge. Can you tell me your set up. Thanks. Jim
Could you tell me the model of the micron guage and how much you want for it. Thanks, Jim P.
Is the meter still for sale???
I recently helped a friend start up a 9000 btu no name brand mini split. Put a vacuum on it, then open valves to let refrigerant into system. Due to a mathmatical error I added 1 lb instead of 1...
I've just started to do some refrigeration and was told that you can't check subcooling on a system if there is a reciever. Can I just check subcooling just before the reciever?????
Would anybody have a copy of a luxaire wiring diagram for the DBUCWO72N125DA. I have been running in to alot of them and want to study the diagram at home. Thanks, Jim P.
Can anyone recommend a good electronic leak detector. Right now I'm looking at a Richie for around $350.00.
I just bought a pipe clamp temperature probe to go with my fluke 16. Is there a right or wrong way to put on liguid or suction line??? Also are there any calibration problems??
Can anyone tell me about a web site that carries the ultimate puller. Thanks, Jmandtc.