Search:

Lot's of threads on here from this ...WIDE range of opinions!!!! :deadhorse:

Used it about 20 times and followed proper applications, charged unit precisely. Close to 1/2 the units died of...

And to that point LENNOX (and the subsidiaries , allied, ducane, etc ) have specifically re tested and redesigned some of their condensers in the last year to handle 1/4 and 5/16 on 1.5, 2 and maybe...

Call the specific manufacturer on this. There is no easy answer to be found on this forum. The manufacturer will want to know the lift of the lineset, and total length as well as diameters. Some...

our scrap yard pays you a lot less if there is ANY steel on the aluminum, copper or brass. I cut the tube sheet ends off ALL coils. Cuttting of the small u bend elbows though is a wast of time, they...

Personally I wouldn't stoop to that level any more than I would install hvac in a meth lab.

Saw a good sign in front of a church recently " To whoever took our AC units, keep them.... It's going to be hot where you are going"

Do this : email this guy with this information. Removed E-mail ...... he is their head tech troubleshooter and a good friend of mine. See if you can arrange for a good smart tech hvac guy (not a...

I have 2 95% 2 stage vs on generation 1 prestiges and have no problems. But, the board is different for sure, and tha gas valve works in steps. I would also call armstrong tech at 1800 448 5872...

this is a common problem insulation being sucked into fans>\. I have seen it on trane gas furnaces more than anything else.

First lesson in heat pumps - Mismatching brands = bad. Mismatching brand AND seer very bad. mismatching brand seer and improper lineset size even worse. Will it work? maybe. Will it work in...

We specialize in Hot Women ...

i have used it, but i like the ace pan patch ..... called PPA better

sent you a pm with password hcong

Unfortunately it's too much of the norm. I don't know how people sleep at night.

your message is unclear. call their techline at 1 800 448 5872, have your stats and superheat, etc ready.

Just FYI Lennox uses 0 % at the factory and the flux is in the gas.

I have been using Dynaflow and have had ZERO problems. I see no need to ever buy 15% again.

I like how he says I HAD TO DO IT ...... :whistle:

I managed a fast food retaurant while in hvac school many years ago. We had about 6 rooftop units. The kitchen got HOT as blazes, the accustat bulbs were maybe 76 or so.


The stats were wall...

There is no such thing as 'low acid' coil cleaner. It's either acid or alkaline.
Water is 7 on the pH scale. Higher than 7 is alkaline, lower than 7 is acid.

Pink coil cleaners are usually...

It's true that more people can buy Trane units than ever. They had to open up their product line as they were loosing too much market share. The only company that lost as much market share as Trane...

In Canada? I wouldn't spring for that. Doubt humidity control is much of an issue. :.02:

Here are some facts on Trane that the high priced marketing campaign will not tell you:

1) A report came out in an industry magazine last year that showed since Trane was bought by it's current...

Lennox Does. I used to take people on tours of the factory myself when I worked there, and I pointed it out. Some of the assembly stations have a small nitrogen hose that is very discreet, you might...

There is another thread on this.

But, where do you see in his article that he says ECM's and two stage cooling solves all humidity issues?

Sounds to me like he says they can control it...

I have seen a lot of the same results. A PAV is truly worth at least a 1/2 ton of a/c in many cases. I have seen ridge vent owners re install PAV's after their attic is too darn hot. PAV's simply...