Search:

Type: Posts; User: droptchevy

Page 1 of 5 1 2 3 4

Search: Search took 0.01 seconds.

  1. Niagara-Ax-How do you create weekly monthly reports for a water consumption?

    I have a water meter consumption project. The gpm meters will pulse for a given amount of gallons. For instance pulse once for 10 gallons being used or whatever it is set at. Now i have this...
  2. Spyder Version Question-Have been away from them for while.

    I haven't been using Spyders since the 3.6 build. I have a project that was spec'd out to be Bacnet Spyders so i am jumping back in the fun pool. I have not upgraded to 3.8 yet. Would you recommend i...
  3. Replies
    4
    Views
    480

    Thanks for the info Matrix. What is the Isoft...

    Thanks for the info Matrix. What is the Isoft Modbus?
  4. Replies
    4
    Views
    480

    Danfoss Modbus into Tridium

    It seems danfoss wants to make is as difficult as possible to bring their Vfds in over modbus. Does anyone have a Tridium for a Danfoss Fc series? I am struggling to get these points in. Any help...
  5. Replies
    3
    Views
    438

    I had one that kept jumping to february 16, 2016....

    I had one that kept jumping to february 16, 2016. It would exceed the max time change and the NDIO would fail everytime. It would come back after i rebooted it, but would happen again within a week....
  6. Tridium Optimized start Stop-What are you using?

    Do you guys use/like the optimized start stop block that is in the Kit control palette? I wanted to see how well it works as i have not tried it on a live building. I have previously used my own...
  7. Wow great post. Thanks that really helped a lot....

    Wow great post. Thanks that really helped a lot. Got it working now.
  8. Niagara AX-Linking one schedule to Many Vavs

    I need to link the current state, next state, and time until next state to about 50 Lon controllers. What is the easiest way to do this? I was trying to do it through the program service like i was...
  9. Replies
    16
    Views
    1,928

    I was using COV on all the controllers. I was...

    I was using COV on all the controllers. I was told to disable COV and that would help. My understanding is that when you run Bacnet Ip and Mstp on the same jace, all the Ip points slow down to match...
  10. Damn firewall got me

    Damn firewall got me
  11. Niagara 3.7-Cant get Jace to connect to supervisor over Niagara Network

    I have done quite of few projects with 3.4,3.5,and 3.6 but this is my first time using 3.7. For some reason i cannot get the jace to connect to the supervisor over the niagara network. I can get the...
  12. Thanks guys you both solved my issues.

    Thanks guys you both solved my issues.
  13. Niagara AX- How do you write a boolean value when a device comm goes down?

    Im looking to create some logic if someone shuts the power off to one of the chillers. Since it will not see a actual alarm from the chiller i want to switch over to the other chiller when the comm...
  14. Thanks guys i got it all figured out. Was pretty...

    Thanks guys i got it all figured out. Was pretty simple
  15. Niagara AX- Any way to run a override report?

    Does anyone know if you can run a report to see which points are in override.
  16. Replies
    16
    Views
    1,928

    Jace with Bacnet/Ip Issues

    I have about 15 Bacnet Ip controllers on a jace right now. I got a call that air handlers were showing they were running when they were actually off. It appears the points are stale, because logging...
  17. I need to learn a little more about writing...

    I need to learn a little more about writing custom blocks. My skills are not up to par to write my own yet.
  18. Niagara Ax- Anyone have a rate limiter block?

    I need to limit a percentage output over time. The spyder has a rate limiter that works and is exactly what i need. If only i can come up with something similar in a jace. I have had no luck so far....
  19. yes i have suction pressure transducers and...

    yes i have suction pressure transducers and suction line temp. This is r134, but i can take the r-22 table and edit all the values to change it to 134.
  20. Yea I am going to use a pid but I need the chart...

    Yea I am going to use a pid but I need the chart to know what the superheat is. I would need 50 reset blocks to try to make this so I'd rather write a custom module
  21. Niagara AX- Need a Pressure Temperature Conversion block

    Does anyone have refrigerant pressure temperature logic blocks or something they can share with me? I need to control exv's from superheat directly in the jace. I was trying to play around with...
  22. Replies
    5
    Views
    945

    NiagaraAX-Bacnet units dropping out

    I have some Mcquay units with bacnet cards. 2 separate buildings with 2 rooftop units on each jace. Sometimes it happens a few times a day and sometimes it will go days without happening. The units...
  23. It is Bacnet Mstp ftom the sitelink to my jace. I...

    It is Bacnet Mstp ftom the sitelink to my jace. I have brought in other several different types of Bacnet devices in the past and never saw this happen
  24. Niagara Ax with Liebert Site Link problems- Stale Bacnet points

    I was working with Liebert yesterday to connect 4 units to their Site Link and then communicate over Bacnet to the Jace. We we able to get the devices communicating and i was able to discover the...
  25. Replies
    0
    Views
    786

    Johnson N2 Driver for Tridium question

    I am using the n2 driver for the first time to test before taking over the first building. I was able to bring in the devices and manually add points to my VND device (TEC1102 and TEC1202). I know...
Results 1 to 25 of 105
Page 1 of 5 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event