Type: Posts; User: danielworkerbee
I have the Fluke 52 series = it has treated me very well for 5+ years now.
The ignition module usually has a wire terminal labeled "burner ground",
that's the one you jump into with you meter.
You are not Kidding, we have about had "it".
The sun was shining today though.
If you are installing the Eternal water heater, I believe you want a combustion analyzer = that's the best way to adjust the gas valve.
I would get it inspected by the installing contractor, the banging could be from thermal expansion or some failure.
It would be nice for you to time the cycle = burner, noise, blower activation,...
Well, my training from the manufactures rep. was that the eff. is the same at each stage and it's all about comfort.
Long run times a whatever stage will heat the house with uniform temperature....
Overall the Pulse was a unique design that has performed well.
Pressure testing yearly would be my recommendation.
CO alarms of a low level type are appropriate for everyone.
You are at the edge...
If its a Infinity system with an Infinity control, I'd be very upset, sounds like a design/software defect.
They do make a wifi Infinity or several Honeywell with wifi that would do air-to-air HP, a...
We replace the whole assemble if noise is a concern.
Did you ever see if fail yourself ?
Have you ever seen the furnace without power and not tripped ?
The rollout tripped is a warning sign of a bigger issue, I would get a tune-up done and look for...
A home that big will have a lot of ductwork, I'd suspect you need the house balanced to get a more uniform temperature in every room on the first stage heating.
Change the batteries in the thermostat and turn down the humidistat = see what happens.
what model of furnace and is there any warranty available on the HX ?
what's the repair cost for the HX and the inducer assembly ?
Some of us tech's want the best for the client,
is this an 80% or 90% efficient ?
super stor , very good warranty and quality product.
Don't get fooled by any mech failer of the pressure switch tubing, had one that tricked me because of the tension on the tubing to the pressure switch would open the hole and the testing with the...
if the t-stat is off the wall and you get the funny low voltage on the white wire, how could it be the thermostat issue ?
I've found down sizing the capacitor helps the "cavatitating sound".
Please put hardware cloth over the openings, never know when a little kid shows up.
Ordered some start capacitors from AmRad and they showed up without the resistor, seems funny ?
Called the supply house we ordered from, he calls the Global rep = whom says " not really needed ",...
what is the dats set at ?
please add a 5 min delay to the outdoor condenser to stop short cycling
skinny the 2 floor damper open just a touch
the heating season may be ok, beacause the heat rises...
Get to the supply house and ask "who's the best and who pays there bills on time ?"
Then take even a runner job, get your foot in the door.
I'll tell you one thing, if you smoke that board = you'll wish for the money you thought you were going to save.
That geo will run in first stage about 90% of the time depending on climate.
sometimes you can't find the issue, just start changing this and that is very difficult and expensive.
We clean our pumps and they are about back to new with a 500 vacuum pretty easy.
we use the...
Can't ship this work overseas, I love helping people and making them comfortable in there home.
In approx. 5 years if you apply yourself i'll know enough to move any place or stay and make more.
as long as you cycled heating & cooling and it operated properly = you are golden.
most modern furnaces know you are running ac and the fan will turn "on".