Type: Posts; User: sarpanch2001
i Think transducer and Suction sensor tells board
check stand pipe .if cubes are to big won,t drop and you will get same code. watch cube size lower stand pipe it will help learn hard way last year :patriot:
Mine is under warranty .return to united same issue
good advise :payattention:
nice Duct work
timer motor ?
defrost safety ?
new condensing unit with new poe oil
God May Bless You!
go to Control see under CUS
set under 0A1
check CB temp IF reading -40 or 275 * replace sensor or just check CB temp on control if its off it will not call for cooling if sensor ok , there is...
under user,s manual it says how to check sensor
20*on reach in lets say A12-700
cut in 37
cut out adjustble from 11*to 27 so
15 to 20*colder than your box temp
master bilt ,crown tonka, carrol cooler, barr inc , hartford,bally box ,us cooler,
southern stainless here local in va waynsboro can put box together for you just do ref work
just call them fax...
X2 save money and time
no teflon tape no paste) X2 One more vote, but little ref oil
Warm 3 In 1 does not work on this type unit he need some real info like this
HFC, R-404A, 60 Hz, 1 - Phase, 208/230 V
Unit Height (in):
Unit Length (in):...
if you can sell it ,why not . if contactor contol electronic will be fine
factory setting, turn ccw out all turn when it stop, then cw turn make sure count turn lets say you got 8 turn cw in then turn 4 turn CCW .thats your factory setting or mid point:)
tecumseh? supco does not have nurve watch. only current relay does :)so tecumseh want save there heart
Best answer :)
Joe got one more vote:)
what about jack hammer:eek:
tecumseh ? i have seen on copeland also .:eek: