Search:

Type: Posts; User: JumpSteady

Page 1 of 7 1 2 3 4

Search: Search took 0.01 seconds.

  1. Thanks for the support everyone. I'm gonna go...

    Thanks for the support everyone. I'm gonna go over the wiring one more time, maybe replace the wires b4 I pull the valve and see if I can return it for another valve.
  2. Hi limit switch is closed and the wires going to...

    Hi limit switch is closed and the wires going to it test good for continuity.
  3. fryer pilot goes out when release valve

    Replaced thermopyle and millivolt gas valve. The thermostat, limit switch, and wiring test good. Wiring is correct, per wiring diagram and identical working fryer beside it. Hold valve in for up...
  4. hoshizaki 3 beeps, evaporator covered with ice

    Model is KML-450MAH.
    3 beep error code, freeze time exceeded 60 min. Evaporator had lots of ice on it, I ran it on circulate and long pieces of ice came down had to reach in and push ice into bin...
  5. Thanks for all the input. Got it going.

    Thanks for all the input. Got it going.
  6. Never mind. Found 134a sticker on evaporator

    Never mind. Found 134a sticker on evaporator
  7. what gas does this walk in take from pressures

    Found and fixes leak. Can anyone tell me what gas this walk in Cooler takes from these pressures?

    Condenser fan cut in 200 diff. 35

    Compressor cut in 28 diff. 20
    High pressure cut out 350...
  8. Replies
    53
    Views
    7,927

    I like.

    I like.
  9. Replies
    198
    Views
    31,802

    I just wanted to be sure it wasn't some weird...

    I just wanted to be sure it wasn't some weird proprietary size battery, thanks.
  10. Replies
    198
    Views
    31,802

    I am thinking about getting an sman2 or sman3. ...

    I am thinking about getting an sman2 or sman3.

    What kind of battery does it run on?
  11. Replies
    5
    Views
    1,044

    Just don't reach down and accidentally unscrew...

    Just don't reach down and accidentally unscrew the regular hose from the adapter while connected to a unit. Seen another tech do that, lose 7 lbs of refrigerant and pretty bad frostbite.

    Just...
  12. Thanks. :)

    Thanks. :)
  13. cant see pics and posts are in reverse order

    When I'm not logged in I can see pictures. But when I am logged in it shows a link and you have to click on the link to see pics. Also when I look at a thread it shows the last posted message...
  14. Replies
    50
    Views
    11,727

    Fluke 16 my frontline meter, but I have an...

    Fluke 16 my frontline meter, but I have an Amprobe ACD-10 Plus I use for amps. I like it, mostly. I don't like it takes CR2032 batteries. I'd rather worry about keeping just 9 volts for my fluke,...
  15. Replies
    161
    Views
    56,974

    No. I only have one, don't have anything to...

    No. I only have one, don't have anything to compare it to. It seems to work as it should.
  16. Replies
    161
    Views
    56,974

    I've been using a Yellow Jacket 69080 Digital LCD...

    I've been using a Yellow Jacket 69080 Digital LCD Vacuum Gauge. It has bars that go from 500 to 750 to 1000, etc. I like it. It seems to work well enough.
  17. Replies
    6
    Views
    685

    Yeah robinair has red and blue too. But I don't...

    Yeah robinair has red and blue too. But I don't think the color has any significance.
  18. Replies
    20
    Views
    4,265

    My friend has used the robinair 15500 5 cfm...

    My friend has used the robinair 15500 5 cfm Vacumaster for many years. It still pumps down fine. But the switch did go out on it and he replaced it with a different switch. Personally I would have...
  19. Replies
    50
    Views
    11,727

    Still using my old fluke 16. I tried to use my...

    Still using my old fluke 16. I tried to use my friends fieldpiece one day on an electrical problem. Going down a breaker panel trying to locate a certain circuit, we had the wires twisted together...
  20. Replies
    35
    Views
    4,603

    That sounds good. My CLC is past due for...

    That sounds good. My CLC is past due for replacement.
  21. Replies
    5
    Views
    1,019

    You have no idea! My before pics were actually...

    You have no idea! My before pics were actually after I precleaned it with the shop vac. That's why you can even see the coil fins in a few spots before I pressure washed it.
  22. Replies
    5
    Views
    1,019

    Most mobile homes don't have an outdoor spigot. ...

    Most mobile homes don't have an outdoor spigot. So you can't use a hose. I can use this with a 5 gallon bucket and siphon kit if there is no spigot, as was in this case. Actually the only thing...
  23. Replies
    5
    Views
    1,019

    Maxi Vac Mini Max

    Been using this a couple years now. Works great. Thought I would finally get around to taking some pictures and video.

    Haven't bought any nasty chemicals since I got this. I only use water to...
  24. Yes it had power. It would try to start and the...

    Yes it had power. It would try to start and the overload would click.
  25. I can't say why, but it is my understanding it...

    I can't say why, but it is my understanding it runs off the mainboard. I guess I'll find out when I replace the board.
  26. The start start relay/run cap tested good. The...

    The start start relay/run cap tested good. The condenser fan motor was not running because of defective mainboard. I believe over time this killed the compressor.
  27. Yeah I agree. Thanks.

    Yeah I agree. Thanks.
  28. Yes that I did. It came with the new compressor...

    Yes that I did. It came with the new compressor kit, and I would change the filter dryer on any system with a compressor change out.
  29. I only put a fitting on the low side, in the...

    I only put a fitting on the low side, in the process tube. But I see your point. I'll try that next time, thanks.
  30. No but I'm guessing I should have. Should I have...

    No but I'm guessing I should have. Should I have tried to blow into it or something? I mostly work on heating and air, but I want to learn more about refrigeration.
  31. No I didn't.

    No I didn't.
  32. :LOL: I get it now.

    :LOL: I get it now.
  33. Replies
    44
    Views
    3,719

    I carry a small map gas torch as backup for my...

    I carry a small map gas torch as backup for my regular oxygen acetylene rig in case I run out of oxygen or acetylene at 5 o clock on a Friday, or out in the boonies. I can always pick up another...
  34. Replies
    44
    Views
    3,719

    The reason my customers call me back, they trust...

    The reason my customers call me back, they trust me. In the long run, you make more money by being honest, you get callbacks and referrals.

    Some of my customers, the first time they called me...
  35. Thanks.

    Thanks.
  36. Thanks.

    Thanks.
  37. It's all accessible if the back cover is off. ...

    It's all accessible if the back cover is off. I'm not sure if it would be better to put a saddle valve on the suction line, or put a valve in the end of the proccess tube.
  38. where is best place to install service port

    I am replacing a compressor in a domestic side by side with drawer freezer. Where is the best place to install the service port? I was thinking on the process tube. I don't normally work on this...
  39. 5 yr old Embraco compressor dead, need replacement

    This is a GE fridge PFS22SISBSS side by side with freezer drawer. The date code on the compressor was 05. The compressor is locked up. I was wanting to replace the compressor with a different one,...
  40. Replies
    5
    Views
    1,357

    Restrictive return

    Look inside.

    http://i232.photobucket.com/albums/ee227/badmofo1877/HVAC/Photo_122210_001.jpg
    http://i232.photobucket.com/albums/ee227/badmofo1877/HVAC/Photo_122210_002.jpg
  41. Yep that's the one, and I think the victor is...

    Yep that's the one, and I think the victor is worth paying a little more for. It seems better suited for hvac, with the smaller handle and available attachments. The lincoln comes with the cutting...
  42. Had one about 4 years. It's OK. If I could do...

    Had one about 4 years. It's OK. If I could do it all over again, I think I would have got the Victor Cutskill. I like the smaller handle better and you can get cool attachments like tuning fork...
  43. Replies
    3
    Views
    782

    Cost to maintain a combustion analyzer

    I am considering buying one of the bacharach fyrite tech or insight combustion analyzers. Can anyone tell me the cost of maintaining one? I watched a video on the bacharach insight that said you...
  44. Thread: Rain Gear

    by JumpSteady
    Replies
    11
    Views
    2,252

    I found some cheap rain gear for $20 at tractor...

    I found some cheap rain gear for $20 at tractor supply. It's also great for crawling around under houses. I can just toss it when it wears out and buy another one at that price. It is very hot...
  45. Replies
    14
    Views
    1,818

    Ya I want one of those. I was thinking more for...

    Ya I want one of those. I was thinking more for finding bad electrical connections. I did see the johnstone ad with it showing a leaking condensor. Even if you can't find leaks with it, I still...
  46. Replies
    135
    Views
    23,935

    Tomorrow I am replacing the unit that I thought...

    Tomorrow I am replacing the unit that I thought was OK. I put super seal in it a few months ago, and the compressor finally locked up a couple days ago. That's 2 for 2 that I have used super seal...
  47. Replies
    135
    Views
    23,935

    I don't have to tell you guys that sometimes the...

    I don't have to tell you guys that sometimes the leak can be very hard to find, and require an expensive evaporator replacement to fix. I welcomed a possible easy and cheap fix for this problem. If...
  48. Replies
    135
    Views
    23,935

    I have used it in two systems. One seems OK,...

    I have used it in two systems. One seems OK, it's been a few months and they haven't called me back anyway, and on the other, the compressor locked up after nine days. I have two more cans of that...
  49. Replies
    13
    Views
    1,422

    brass yellow jackets are bling bling for heating...

    brass yellow jackets are bling bling for heating and air
  50. Replies
    59
    Views
    7,453

    I've always used fluke. I tried to use my...

    I've always used fluke. I tried to use my friend's fieldpiece one day. I was going down a breaker panel looking for continuity through a light bulb element. This was an electrical job and we were...
Results 1 to 50 of 315
Page 1 of 7 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event