Ben a long time I last posted , just wanted to add my 2 cents. I all ways clean flame sensor at heat check out to prevent possible go back. Most of the older Rheem boards just needed 1.5 microamps...
Type: Posts; User: acg
Ben a long time I last posted , just wanted to add my 2 cents. I all ways clean flame sensor at heat check out to prevent possible go back. Most of the older Rheem boards just needed 1.5 microamps...
your probably moveing to much return air threw grill , if blower cfm right you need larger or more return air grill or go with grill with larger opening on loovers.
If every thing is good with pilot flame check millivolts on thermopile disconnected-without
load then connect and read millivolts with a load. It may be the safety part of the valve bad.
dont have my blue book with me to look it up but if you get all the numbers off compressor and around the age then you could tell.
I wonder where the leak was? a rusted out drier ok replace it, but a leak in a evaporator
coil thats 18 years old, unless its a distributer tube that rubbed on a turn bend a good clean braze , but a...
Hey! check out what btu capacity those compressors have on them, at least on the last version of the GSC you may be shocked.
Get a heat load done on house so you know exactly what you need , before you get a a/c contractor to install it for you. Its not ilegal to install a 10 seer condenser just smarter to install new 13 +...
If ducts & system sized right most manufactures count on running 1st stage longer to dehum but that dosnt allways work. T/stats that have d-hum opthion use an average of temps to display rh% and set...
you said solenoid in compressor 2 stage. If your talking about the rectifier-solenoid on a scroll compressor it self verify, disconnect both 24 volt wires to it & see if it over amps or blows fuse...
Find an A/C contractor that can size all your supply and return ducts right for the upstairs and if your A/C system is sized right, and you have enough room at plenum also get a 2 zone damper system...
did you mean the discharge plenum ???
residential around 160 sq " per ton for a filter return grill, 80 sq" for a larger loovered one.
Heat load, need exp-tech to recheck for proper refrigerant charge,air flow, air leaks,
t/stat wireing and configuration. Also install humidistat to control the D-hum better.
The Lennox solar kit only produces 190 watts on a good sunny day. Its expensive to install solar power for your home , but I hear theres a device comeing out this year thats installed on new or...
IM shure every ones had problems with run caps on all brands of equipment.
Ive tried other replacements Global , mars etc. those brands continue to go out , Done ok with Turbo run caps. Can anyone...
I dont know what your average temp or load calculation is in your area. But if all has been done on my first statement then give some more feed back.
If heat load was done and correct find out if they figured it just for 20*diff / ave 100* fig 80*/ 20* difference.
If a/c operating correct & the right tonage.Concentrate on a flow hood test for the...
I went to visit my Dad in Hewitt / WACO TX. and looked at the system that had just been installed. The primary drain line wasnt insullated (thats not to complain about)but the vent pipe was two...
I would call a new a/c company just to do a good electronic leak test of your system, and believe it or not
I had a customer that had a R#22 leak problem & come to find out the neighbors kid was...
I dont have # handy it should be around 41,000 BTU
3.5 ton 51 week of 1990
by code some inspectors would like to see a return 10'from a fire place or wood burning stove.
Sorry drk I just heard the brush method didnt do so well
thats all.
Duct cleaning is good.If there is a mold problem thers no cleaning to fix it ,repair air leaks,cut out the infected area and rebuild and or replace ducting.Most brush types of cleaning doesnt do so...
Without a doubt the very best method in the USA does a lot
better than the brush method. Call (210)732-9772 talk to Lee Haun you will profit from this Info.
I guess your right! why dont you just adapt a window a/c to
use in your enclosure with a humidistat/stepdown tranaformer 24v to a 24v relay to drop fan speed down to
help d-hum.
You can install panel mount units like what spint uses on there wireless equipment,also what alot of electrical panels use to cool down there equipment.I just dont know who makes them????
The RSES MEETING went well at the PLASA HOTEL.Heat pump classes went well and demo on the new upgrades for low volt
current protection-trouble shooting those shorts & easy way to install single...
The Tittan III is a good one.The Photo-Cat is used to help slow down pollutants ect...and coated with Titania what makes white paints white!so it can reflect the UV light and rays better.The newer...
On low voltage circuits. A new type of fuse that replaces all styles of fuses used on 40 va transformer systems,and a two wire tool that protects your controls that saves you time locating your...
room 5& 6 should have there own zoned damper also if needed a barometric damper to releave SP.
Use the short-pro tool to locate 24 volt short it will protect your 24 volt circuits while you test, and after
that install the resttable fuse.
I didnt know there was a fee, I was doing a demo at 10:15 am on the 12th on the new low voltage current protection
and trouble shooting,also single phase voltage protection.
What kw heat srip did you have before?The refrigerant charge may need to be rechecked. And if the 3.5 ton evaporator coil is correct for the 2.5 ton heat pump
you still may have to lower the blower...
RSES DALLAS-FT WORTH CAPTER conference on March 11&12- 2005
will have Copeland,Sporlan,Lennox,Nu-Calgon,Trane....
Also the newest upgrades on low voltage current protection.
24 volt shorts and the...
The older type of ozone generators had some health issue problems, for sure.When the lungs take in an oxygen molecule your hemoglobin absorbs it and releases a carbon dioxide,
but when O3 is...
A garage sale will be held saterday 2/5/2005 located at
5410 Jackwood Dr. San Antonio,Tx. 78238. Ladder racks ,
office desks , metal shelves,pot-relays,pilots,fan/limits
VANS! van seats!all offers...
You said it was new construction right? if you dont think its a power supply problem you must have a intermitent short. Check your ground voltage and locate that short pro tool & reset fuse at Insco....
yea chech the primary line voltage to transformer and wire in correct tap.you could be having inrushes of too much voltage blowing fuse. (power surge or spike) I recomend the short-pro-tool if...
E-mail me at dmitchell48@netzero.com Imin the hvac Industry
also getting my own products out now. Im interested in your idea and I have direct contact with a damper/zone
manufacture and major...
What city do you work in?