Search:

epacertified · 12-31-2012, 02:59 PM

Come on look at the furnace!
Can't YOU tell?

epacertified · 12-31-2012, 08:36 AM

I,m wondering why the inducer does not continue to run even thou the pressure switch fails to close.
Seems to me its safer to have it run than stop,the board should then keep the ignighter from...

epacertified · 12-31-2012, 08:29 AM

I finished up a class last week with Johnstone on MODULES
Class was told that 99% of switch sent back tested A-OK

epacertified · 12-06-2012, 06:56 AM

I pick robert90

epacertified · 12-03-2012, 02:00 PM

Its Called TROUBLESHOOTING!

epacertified · 09-09-2012, 09:39 AM

Thanks Much
Now I need to find the parts breakdown
I,m looking to get information
on blower motor and control board
thanks Bill

epacertified · 09-01-2012, 07:49 AM

model aud080c936hi AMER STAND FURNACE

SERIAL K515UKM1G

epacertified · 07-17-2012, 06:33 PM

TodayI WENT bY TO CHECK THE INDOOR CONDITIONS
Lower the Blower speed to med hi and took some measurements
room temp 75* outdoor temps in the 90s
System running supplytemp 59.7 return in wall in...

epacertified · 07-16-2012, 07:21 PM

Im thinking air flow also
The temp at night seems to be the same with the sun DOWNunit is a 80 furnace 1375 cfm with a 2 1/2 ton cooling end
maybe the speed shouild be changed but why after 3...

epacertified · 07-16-2012, 06:22 AM

Customer has 3 year old system which has not experieced problems till this month.
Clogged drain line cAused a problem over the fourth of july weekend .
Since then Customer complains that the...

epacertified · 07-10-2012, 10:51 PM

looking at it in the Morning.

epacertified · 07-10-2012, 05:55 PM

Customer wants me to qoute a cooler for a 50 sq foot room that can store 500 bottles.
What equipment should I be looking at?

epacertified · 06-24-2012, 06:20 PM

Need to let it defrost
Then pressurize and leak check
But I think a replacement might be in order

epacertified · 06-24-2012, 05:32 PM

Thanks
Will do!

epacertified · 06-24-2012, 03:27 PM

A-36 GOODMAN AIRHANDLER

I never replaced a coil in one of these and need to know what will fit??

epacertified · 06-18-2012, 04:09 PM

Anyone have spec,s or a cut sheet?
I,ve yet to look at this one

epacertified · 06-16-2012, 06:57 PM

A Big Help on a LONG day!
Thanks Brother!:grin2:

epacertified · 06-16-2012, 10:30 AM

does anyone know what the codes are (number of flashes on the board?
I have a unit flashing a 11 on the board
Its a new install and its at startup
Model aou36rml1
thanks bill

epacertified · 03-23-2012, 02:44 PM

Please enlighten the rest of us as to your favorite TROUBLE FREE Brand.

epacertified · 03-23-2012, 07:29 AM

Unless your a DREAMER

epacertified · 03-22-2012, 10:46 PM

RIGHT!

epacertified · 03-20-2012, 04:44 PM

where the condesers factory charged?

epacertified · 03-20-2012, 11:21 AM

We would like to know THE REST OF THE STORY

epacertified · 01-10-2012, 10:43 PM

I,ll go!:cheers:

epacertified · 11-13-2011, 12:29 AM

I,ll walk if I have too

Search:

Search: Search took 0.06 seconds.

Thread: Goodman Furnace

Thread: Goodman Furnace

Thread: Goodman Furnace

Thread: 2011 H-Talk convention

Sticky: I pick robert90

Thread: 5amp fuse blowing

Thread: age of unit

Thread: age of unit

Thread: r410A SYSTEM TROUBLES

Thread: r410A SYSTEM TROUBLES

Thread: r410A SYSTEM TROUBLES

Thread: wine cooler

Thread: wine cooler

Thread: rEPLACEMENT COIL FOR A ??

Thread: rEPLACEMENT COIL FOR A ??

Thread: rEPLACEMENT COIL FOR A ??

Thread: Trane PN CRL01376

Thread: 4 zone fitjitsu

Thread: 4 zone fitjitsu

Thread: 5ton 13seer Goodman HP DOA

Thread: 5ton 13seer Goodman HP DOA

Thread: 5ton 13seer Goodman HP DOA

Thread: 5ton 13seer Goodman HP DOA

Thread: 5ton 13seer Goodman HP DOA

Thread: 2011 H-Talk convention

Sticky: I,ll go!:cheers:

Thread: Pgh get together