Search:

Is this system mixed air return or 100% outside air.
Do the dampers operate correctly? That kind of split looks like plenty of flow.
What is the return air temp?

Westside

One stat two sensors, easy less expensive works great.
Westside Mechanical

Honeywell Vision Pro

I like the reznor unit heaters, get the one with sealed combustion, side wall vented.

Same with the Modine Hot Dawg.

Work great in michigan not expensive but very functional.

Westside...

Both the dx-9100 Operations,troubleshooting and dx-9100 engineering are great clases. It is fast and easy to get lost if you are not familer with what they are discussing.
I would download the...

I have condemed many furnaces that were ok by someone else.
If the customer was unsure or a second opinion was that it was good I would pull it and show the customer.Removing the heat exchanger...

Just remember CT where ever you go their you are. You are right that your desiny is in your hands. What is ment to happen with what you choose is what is is ment to happen.
Good luck with your...

HeyBob thank you for the heads up
Westside

Have used usb to serial converter Model no u209-000-r and it works fine. It did not work on some other controls but did on dx-9100.
I have added a socket serial I/O pc card and that has taken...

I had the same problem when i went to an IBM think pad. Did the usb adapter and took a bit to set it to com 1 or 2 for it to work i just use it for the dx mostly. The rest i do from the work station....

The pressure drop dosn't make sense, unless its dirty, Has oil seperator, filter on inlet? with no load you will feed hot gas. With those temps its not frozen. But you dont need much volume on a...

I would say that place was one of the high lights of the trip. Love that stuff. Was kind of disappointed that the rain washed it out of my beard so i couldn't tast it again later.

Hey all,
wanted to say thank you,we all had a great time.Chris has been after me to write a response to what a great time we had.
Joe,chris,kathy and paul

tankless is the way to go. stack them tougether for what ever demand you have. Expensive yes but it maches what ever the demand is, steping on each one to supply demand or all at once. It might take...

I will check the calibration on the switch, makes sense. It is getting cooler hear at night in michigan. It is set for 50 but havent checked if it is right yet.
Thanks Chillrdude

Trane RTAA2704xu01a3dobgkn I am getting a fault code 1a6
which is a pre-stop fault on oil flow control on compressor b. Pre-stop turns off oil solenoid and sets a timer,looking for the differential...

As i said earler we needed to get an eary start.So we are hear, long drive for us. Room 10032.

Joe & Chris, Kathy & Paul.
We will be there thursday night early.

Mine has win xp pro no problems

four of us made it

thank you spotts,
I called Tonya earler and asked for the late cruise and was told not until sepetember. Glad you set me straight on that one.
westside

So they dont have a late night cruise until september but a dinner cruise. Is that what we are all doing.
$60.00 each.
Clipper city has a party sail on saturday for $30.00 from 8 to 11 all you...

What do the design specs call for on this system? The factory sensitivity set up on the stats is 2.5 psi per degree change. We are energy pigs here. heating and cooling at the same time. Any of them...

The t-4002-201 is a High volume output stat. Calibrate to mid spring range.
Determine ambient temp value.
Turn setpoint dial to ambient temp.
Adjust output to mid spring range.of the controlled...

Joe and christine

Westside Mechanical
Joe & christine 269-760-5413
I will be there thursday night. Going to get an early start.