Search:

Sounds like its overcharged, does the system need a fan cycle control installed? Cooler outside than inside. what were the pressures before adding refrigerant? R-22?????

If older UCM board, did you check CTI Board? and with either board possibly holding out first stage due to econimizer, check if damper is opening there is also green/yellow LED on actuator to show if...

Sounds most likely Needs a fan cycle control if will not cool with low ambient but works good the rest of the year. Could be a number of other things also this was just the first that came to mind....

There is about 35vma's 4-6 UNT's will that be pushing it ?
Also do you know the LIT-#### that states that info. Or any others that are a good reference for the N30/N31?

I have 2 buildings owned by the same customer. One has NAE55 that is located at the main office and the other has N31 that is using a dial in modem for access. They currently are having problems...

Sounds simple enough :) the click upload-to-download confuses me a bit sometimes and just want to make sure I don't mess things up.
Can this be done frome remote location or does it need to be...

So i'm a newbie to controls supervisory devices .
Came across one recently that had no database when logging in, Nae55 one of the first models its missing important default settings so its either...

So no one has any input??????
Any input about moving from one state to another have to move tohelp family out and not having any luck figuring out if I'm going to be taking a paycut or should get a...

depends on many thing. Location , Years exp. Skill level , equipment type serviced , types of service performed etc...etc...etc...

I am planning on moving to Cleveland area of Ohio and was wondering if anyone is familiar with the area Jobs there ? I currently work on commercial Industrial equipment and Metasys Controls systems...