Search:

i own a blu vac and like it alot....but the only down side that i have found is the 1/4male fitting instead of putting a female fitting on the gauge...what do u guys use on your micron gauge? a hose...

yes that was a differential oil pressure of 40. 100psi at the pump and it is a copeland semihermetic.and the unit is a 20+ year old york.
initially this unit was tripped on oil pressure and that is...

I adjusted 1 of the txvs but the other is non adjustable...not sure but im wondering if the tx might be stuck full open? I also added a pressure switch to the unloaderdue to unit runnin at 55 psi...

working on a york split system 15-20ton i guess..unit has 2 solenoids and txv's and compressor has an unloader. system was tripped on low oil pressure upon arrival-measured actual oil pressure and...

picked up multiple 407c leaks with my dtek and works great

thats one heck of a piping job...looks like it would have been pretty hard to thread 6' of pipe and make it right....NOT!

no there isnt an alarm or safety switch on the pump...existing pump and we did not replace it per the boss

schedule 40 pvc is all thats required in our area...ya i hate them midget basements they make for a long day...glad im in commercial now!!!

ya it worked out really good...better than the old 1 inch filter in the blower compartment

old furnace was icp horizontal...new furnace trane 2stage 95% with macL filter enclosure.

removed

lennox pulse are junk anyhow, call it a loss and put a real furnace in!!!