Search:

ice machine cleaning is probably one of the most thankless jobs in this industry. the owner is always in a hurry to get you out of there &
never has the bin empty or a place for icestorage while...

i agree with dolman that if it has a reciever it is not a critially charged unit.
call the mfg. & get the correct specs on the unit & weigh in the required ammount.

most likely they werent preped & soldered properly or that wouldnt have happened.

im in agreement with jp.
pure b s

a lot of that theory seems as if its not worthwhile but then you finf you need it to
solve some of the problems. start studying & when you find a job keep on studying.
hands on is also needed but...

i use the cooper sh 66 & have been very pleased with it.

i e mail my 93 yr old mom quite regurlarly.
sent her a computer when she was in her early 70 s
& one of my daughters went to visit & set it up for
her. she is now lost without her computer.

you beat mr to the draw.
at this time he should be putting data loggers in place to see what is going on.

i found the samething & am sure others have too.
the blu vac isnt as forgiving as the others on real small leaks.

i would go with the blu vac. bit of a learning curve but the results
are worth it.

i was at goodman a couple years ago & they had one on
the sale table. bought it for 25.00 used it for the first time
last week. nice when you need it but is mostly just a paperweight.

i would buy it in a heart beat. i still have abiut 200 lbs. left but is the best slovent for cleaning up burn outs but you really need to evac. well because
it likes to hang up in the tubes.

it will make you a good apprentice only if you pay attention &
continue studying your trade. in this trade your never thru learning.

ive found a white paint marker also works pretty good.
the last tach i bought was a single purpose fieldpiece & it works
pretty well.

i usually buy them by the dozen but then again most of my
digital toys also use 9 v. so far im still on the orig. batt. on my 900
now it will probably die tomarrow.

the ak has a much better future than the sman.
it has been field tested & beat to hell before being released instead of just going to market & trying to stay ahead of the competition.
i still...

ive made a lot of money from these type resturants & bars over the years.
they have also added to my tool collection so their on staff fry cook/
refg. mechanic wouldnt be trying to save them money.

i just inherited an account that has 6 of these things & will
be starting to clean things up next week. at this point the coils
still cleanable but told customer to get ready to start changing...

i found out the same thing on trane pkg. units.
especially on the 825 rpm motors.

ive been doing the same thing with no problems. i even have one operating on an old 10 seer evap. that is holding its own in this 112 deg. weather.

i may be wrong but ive never had any problems with a std. 45
flare on 410. i have both 37 & 45 but only use the 37 on hydraulic
flares which usually use an inverted flare nut.

i found the appion to take a few hours of a combination of vac. &
using with refg. to off gas the material they are made of. been using them
about 6 mo. now with no problems.

the dirt needs to go out from the direction it went in. take off the top &
wash from the inside out. i prefer to not use a nozzle to prevent bending
the fins over & no chemicals unless...

the only problem ive had with the posi lock is the little extension adapter
that slips over the drive screw bending . all my other pullers are otc &
blackhawk most are at least 30 yrs old &...

your starting to get old.
will be i nto pick your brain fri. if your in the office.

when i come on that situation i always turn the good fuses upside down
because i believe the powder around the fuses may be setteling &
causing the fuse strip to develope a hot spot.
i was told...

i bought a set of their digi 3 years ago & after they were sent back 6 times for service they refused anymore warranty. got my money back from the wholesaler & he let me keep the dead gages. they...

was getting parts out of my truck at an apt. bldg. that had been down
for a few days & had a little old lady block my truck in so i couldnt
leave until i had the a/c working. after the water got...

very well put.

when it rains here in vegas i just put my digi cools in a bucket of water to keep the rain off of them.

while your there give doug lockhart a call & maybe he would take you mtn. biking with him.

you should be getting a better split than you are. sounds like you need to get hold of your friend at the parts house for a recomendation for
a good tech. while your looking for a tech dont shop...

send me that ticket . ive never worked in detroit & would enjoy the different scenery . also need the experiance.

hope the screw didnr pierce both sides of the tubing.
i think most of us havemade that same mistake at some point.
just a part of the learning experiance.

bought the blu vac & after using it for a couple of months gave away
4 others i had been using also take a look at the accu tool scale.
all top shelf products.

the on from j stone is great when you get the correct fittings to keep it up rite.
you dont need to run in psi checked mine against my testo 510 earlier & im
purging at 7 in. w,c. could...

sions
i have deep sockets with adapters welded on to fit in my kwik change 3/16 thru 9/19. they sure are a time saver . the 11/32 is real handy if your doing a lot of motor work. i also carry...

get a flex duct ductolater & look on the back of it
it probably has all the info you need

looks ok but i would look at the one from accu tool
ive had mine for about a year & get it checked quarterly at the state
dept. of weights & measurements & it is still on the money

a missing core is not going to cause a compressor failure without
some ioss of refg. overtime & you should have noticed a loss of
capacity during this time period. if they are blaming the failure...

a missing core is not going to cause a compressor failure without
some ioss of refg. overtime & you should have noticed a loss of
capacity during this time period. if they are blaming the failure...

get the slo blo instead of the one time type.
i look but seldom comment on diy subjects

its time to call out your local pro.
sounds like a simple problem that could kill your new unit

you have along rocky road ahead of you to overcome the
previous track record of those before you. in theory the freus
is a good idea but in real time the maint. doesnt get done properly
& water...

dremel tool is ideal for this type of work.

i would highly reccomend the digi cool 900 gauges
if you do a search you will see far fewer complaints &
less time sending them back for warrantyproblems.
doug & brenda will go out of their way...

im sure you will be very happy with your purchase & the
product support. doug & brenda are great people to deal with
& customer satisfaction is at the top of their list.
i havent given the 900...

been threuthis few times & i can see call backs & headaches in your future.
get the correct motor & get it overwith.

i would have t0 hear thar from doug before id believe it.
that is the toughest & best analyzer out there & i dont look for it to go away before the wireless becomes available.

save yourself some cash & just install a sweat on piercing valve.
i have several of the factory tools for the fastaccess valves &
they are pretty pricey.