I am looking at a metering project that is requiring that I be able to import waveforms from electric meters into a front end, I am looking to use Niagara4 as the front end. Any body out there have...
Type: Posts; User: fisha
I am looking at a metering project that is requiring that I be able to import waveforms from electric meters into a front end, I am looking to use Niagara4 as the front end. Any body out there have...
So after talking to some folks, you can define in VMWare what graphics processor the Windows VM can use. It sounds like you can do this in Parallels as well. I'm going to setup my MBP using VMWare...
Yes I agree. Thanks for encouragement. I was hesitant but this helped.
It depends on what you want to do, I wanted to maintain the optimal start feature in the ALC controllers. If you don't want to do that, you can just write to the schedule directly using its BV...
Do you have access to WEBCtrl? The schedule microblocks will need to be the bacnet compatible version.
I got this to work, I will revisit tomorrow and send over info. Your email in your profile?
Ok, I don't think there is even an option to buy one with that configuration. Not without sacrificing a lot of other stuff. Thanks for the heads up, I will keep an eye on the battery while I am...
So when you say discrete, do you mean a video card that is not embedded in the motherboard?
I was thinking about getting a new MBP with 500gigs of storage. I don't see myself running more than 2-3 VMs but who knows what I will need. My thinking was smaller hard drive and using the cloud...
That's very helpful thank you. Any suggestions on how to allocate resources?
Anyone out there successfully running N4 or AX in Bootcamp or Parallels on a Mac? OS would be Windows 10. Thinking about making the switch to Mac...
I'm talking in more of a general sense about the controller line not just about the IP connectivity. Now that I've used it I HATE using MSTP.
I agree with this 100%. I don't know how the mesh will actually work as the signal degrades the more hops. I could see it being more for redundancy. I also agree with the planning...in the...
Standby set points are 2 deg f above and below occupied set points.
I didn't ask if it could be done, I asked if anyone has ever done it and what their experience was after implementing.
If I do that, could I run into humidity issues in the space?
Has anyone ever shut off the fan when the zone is in standby mode? I am doing a retrofit and we are installing motion sensors in spaces to set zones into standby during the day. I'm weighing the...
I believe you learn over time and jobs, I would disagree that it costs about the same as wired. It's gotten us jobs before. Just tell your estimated to be conservative.
Ok that helps, but what does that mean in a logical statement?
I think it already has not been implemented well. I believe it can be though. I'm not even really sure what IT is...is is proprietary knowledge that someone has transfer to code that gets used over...
Alright, here is one for ya:
I am trying to take the APAR rules and program them in EC-GFX. I'm not sure what the word "For" and the ":" mean is this rule:
For |Tra - Toa| ≥ ΔTmin: |Qoa/Qsa -...
I have had a lot of success with Distech's enocean thermostats. Although we are using the IP line which doesn't currently support the enocean adapter. We found an enocean bacnet/ip gateway that we...
Hello All,
I'm starting to generate a edge analytics code library for my company. I'm struggling to determine what equations I should use? Is there a good reference out on the internet...
Juan,
Alerton has a driver out for their newest global the "ACM" that allows it to communicate with IBEX controllers. You could pull out the APEX globals, install the ACMs along with their new...
Thats what I was going to say, use the thermostat block.
COV Min and Max send times are for network COV broadcasts only. Every two seconds? That's really slow, it's probably reading a lot faster than that. What block are you using to enable the mech...
All:
I am looking for some advice on how to deal with a particular site for which the owner is asking me for my (Niagara) help. They currently have a Honeywell WEBs (AX 3.6 maybe) system and they...
Personally I'm ok controlling via comm, others at my office are reluctant and prefer to hardware everything.
I believe you are correct about the ground loop, we decided to emininate the 0-10vdc and write to the same point via Bacnet.
My email address in my profile is no longer active, I updated it can you please resend?
Here are the pictures I took of the laptop and the hardware:779951779961779951779961
Win control XL+
The customer does have a laptop with a USB key plugged in but they don't have the login and password anymore...
I see some *.pnl files but I can't find an editor.
I'm working on a project where I am replacing an old KMC system and I'm trying to look at the code to understand the SOP of a handful of smoke exhaust fans. Anybody know about these old system and...
I have two McQuay units, wired indentically one works and one lets the smoke out. The 24v ground in my panel is earth grounded, not sure about the McQuay unit. I haven't been able to measure the...
Is your Bacnet Network number under your BCPBacnetNetwork the same as the network that the LGR resides on?
Your EPROM might be bad...does the model code end with C3?
I got it, set the Write As to Enum and it work, Orion your the man!
I created a special event without exporting calendars to the controller and I didn't have any issues?
I have an McQuay AHU with a Microtech 3 controller on it, I'm giving it a 0-10vdc to reset the SAT Setpoint. Twice now when we terminate the wires the M3 burns up where the 24VAC terminal block is...
I use the Distech version of PA2 and am very happy with it. I don't even bother with the N4 graphics, it's just so much easier and they are adding features all of the time. I recommend it as it...
I don't want to write directly to the schedule BV, I lose the optimal start function in the ALC device if I do that.
Orion, I got as far as you described, but when the schedule tries to sync I...
777311
777301
c:\ALC.png
WEBCtrl 6.0. Controllers are ZN341v+. I have access to all ALC config tools.
So...my title needs reworded. Should be N4 Schedules into ALC controller.
Yes that's right, I'm trying to Export Schedules to the ALC devices, have you ever done this on an ALC controller?
Hi All,
I'm trying to pull in Schedules from an ALC controller using the Bacnet Schedule Export tool, I'm trying to sync my Niagara schedule directly to the schedule in the ALC controller. I set...
Haha this is good!
Lol...sorry...I gave up trying to use straight ENVYSION a while ago. I do some basic things like BQL queries for locked points and audit log and display them in ENVYSION but that's about it. IMHO...