Search:

Type: Posts; User: googizzo

Search: Search took 0.00 seconds.

  1. i use it to check it when im done... when there...

    i use it to check it when im done... when there blue im outta there
  2. Thread: R404A Freezer

    by googizzo
    Replies
    14
    Views
    9,389

    Thank you

    Thank you
  3. Even if I held the the hoses the hook and my...

    Even if I held the the hoses the hook and my gauges would spark against line set at a couple inches and still shock me
  4. It was not static it was the dual pressure switch...

    It was not static it was the dual pressure switch ... I had 4 volts from common to ground and never has 4 volts shocked me like that... Replaced it yesterday all is good I think if it had been...
  5. Like an ignition coil

    Like an ignition coil
  6. Cooler remote condensor shocks me after I charge or let gas out

    It shocks the hell out of me, if I put my gauges next to it and spark 2 inches. What's wrong with it? It is ground, too.
  7. Replies
    27
    Views
    1,682

    It's at about 45 suction psi on 407c

    It's at about 45 suction psi on 407c
  8. Replies
    27
    Views
    1,682

    It's not... It's just barely sweating

    It's not... It's just barely sweating
  9. Replies
    27
    Views
    1,682

    door seal fixed it... so far

    door seal fixed it... so far
  10. Thread: Nu-22 vs R22

    by googizzo
    Replies
    5
    Views
    935

    this is great advise... even if you just add a...

    this is great advise... even if you just add a little poe to the min oil... it works great on air cond.. they mix great.. like synthetic and regular oil in ur car..
  11. Replies
    27
    Views
    1,682

    im at like 20 out 40 in

    im at like 20 out 40 in
  12. Replies
    27
    Views
    1,682

    like the cut in cut out...?

    like the cut in cut out...?
  13. Replies
    27
    Views
    1,682

    it has one wired to both condensors .. freezer...

    it has one wired to both condensors .. freezer and cooler... going to put one for just the cooler..
  14. Replies
    27
    Views
    1,682

    heading that way with new clock.. and seal......

    heading that way with new clock.. and seal... will report back.. also the building is short on ac and high humidity... around 83 degrees without cooking ... the restaurant isnt open yet.. its a...
  15. Replies
    27
    Views
    1,682

    this is really close to my situation... evap fan...

    this is really close to my situation... evap fan is already always on however.. the 3 doors would blow open when i shut the bulk head ... so they had me screw them shut.. the bulkhead door is missing...
  16. Replies
    27
    Views
    1,682

    yes

    yes
  17. Replies
    27
    Views
    1,682

    Another walk in cooler thats killing me

    Id swear im getting beter at this than this... Brand new equipment.. r 407c 2 fan evap 3/4 hp sled
    cleared the sight glass ... runs great ... every week or so 5-7 days freezes up and goes to 50...
  18. It's drop in ..... Recover the 22 ... Put in the...

    It's drop in ..... Recover the 22 ... Put in the 407 .... Done
  19. AND IT TOOK WAY LESS R-22 i had to of been way...

    AND IT TOOK WAY LESS R-22 i had to of been way overcharged...
  20. ok guys you have helped tremendously.. so i...

    ok guys you have helped tremendously.. so i cleaned and cleaned and cleaned..then i straightened all the bent fins and melted the ones that were matted flat. pulled out all the r 22 and pressured up...
  21. It has a small one way filter drier but it's ...

    It has a small one way filter drier but it's new. Last night it as still at 41 ill be heading back this afternoon. Going to straighten the bent fins wash the coil with cleaner. Its so much cleaner...
  22. I just left to go run. Two calls then heading...

    I just left to go run. Two calls then heading back.. it was hot coming off of out to over 100 I'll measure when i get back
  23. In largo... it's close to Tampa

    In largo... it's close to Tampa
  24. II have 6 degrees right now but I'm already at...

    II have 6 degrees right now but I'm already at 240 and 30 degrees above ambient on my saturation temperatureis it okay to go over 30 to get higher sc
  25. Yes

    Yes
  26. Update. 82 outside 250/40 suction line at55...

    Update. 82 outside 250/40 suction line at55 degrees liquid line at 109 so 6 degree sub cool and 30 sh... this seems close box is Down to 45 blowing out 42 and 43 on Evaps
  27. Inside i have on the bigger txv 64 degrees the...

    Inside i have on the bigger txv 64 degrees the little one is 63 the out air is 43 and 45 so does that put me at around30 super heat?
    Sorry for being so far behind I thought doing this simple...
  28. Charging got a little differnt somehow with a...

    Charging got a little differnt somehow with a cleaner con coil I'm at40/210 with a liquid actual temp 107.5 it's 77 out side about to check evap 62 suction temp at compersor so i have no sub cooling...
  29. Receiver is Henry s 8065 is about 8 x 14......

    Receiver is Henry s 8065 is about 8 x 14... cleaning coil pressures are low 5/125 sight glass is fluid can see tubulance but no bubbles
  30. I'm on my way there now. I can't get the suction...

    I'm on my way there now. I can't get the suction line cold at evap. It was 63 and presure chart had it at like 0 so i guess it has sixty something degrees sh.. on way there now
  31. im looking for a 36 degree final temp 4 degree...

    im looking for a 36 degree final temp 4 degree window .. 36 off 40 on sensor in front of fans.. so 50 is really far away i had 50 degree box sensor read 46 in front of fans.. still far away .. i was...
  32. too much head presure? this walk in is killing me

    last time i asked something it helped alot. so here is what im working on.. same old pos walk in
    20 y/o copeland condenser with 2 fans slab coil .. new comp. 37k new receiver (was leaking through...
  33. thanks guys.. and i really need to write a...

    thanks guys.. and i really need to write a invoice everytime i go out... that is an area i could improve on greatly.
  34. Also i like voiding out parts warranties if...

    Also i like voiding out parts warranties if customers mess with it .. that is a good one i had NEVER thought about that
  35. Ok i made it back .. i got the cooler up and i'm...

    Ok i made it back .. i got the cooler up and i'm definitely not the customer..
    He has the jug of freon cause he just goes right down to the supply house and buys it ..
    i talked to him and told him...
  36. Warranty and customers working on their own stuff.

    I have a customer that keeps changing the charge on his units then calling me when he breaks it. Most recently he added a whole jug of r-22 and blew up the compressor no one of the walkins . I...
  37. Thread: How much oil?

    by googizzo
    Replies
    3
    Views
    671

    I got it done.. found an excat part match weled...

    I got it done.. found an excat part match weled it in no problems.. i didn't know so i added 1 oz by wt for the oil.. from a vac then pulled the vac down for 30 mins.. it worked tho no more leak..
  38. Thread: How much oil?

    by googizzo
    Replies
    3
    Views
    671

    How much oil?

    I am working on a commercial refrigerator. It holds 10 oz of 134a. How much oil do i add to it when i change the spun copper dryer. ( the electric was rubbing it and rubbed a hole in its side. I know...
  39. Replies
    10
    Views
    2,187

    i use lennox 5 works great..

    i use lennox 5 works great..
  40. Is there any reason to take NATE after you have your state lic?

    Is there any reason to take NATE after you have your state lic?
    I have the fl state lic is there any reason for me to take it?
    would it count as my CE requirement?
  41. Replies
    73
    Views
    9,922

    i did no tech school... i hired in the field as...

    i did no tech school... i hired in the field as a helper within 6 months i was lead installer worked there two years as the lead
    switched companies to run service so i could get commission cause...
Results 1 to 41 of 46

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Quality Home Comfort Awards