Search:

I have had several communication problems on my aging network, and when I read from A to G, and B to G, I get voltages that nervously jump around 3.0 to 3.5 Vdc, and 1.5 to 1.9. This is when I have...

Excellent.

Does the time that it takes to do 128 samples, impact the controller differently than doing 1 sample. Is the overhead of the controller impacted by having all the inputs samples at...

Thanks for the info. Would you think that with 128 samples, that it would be slower to display a change to the screen? If I can change it, what would have been the original reason to have it as a...

What is the average field on configure inputs for?

It is not always the same in the system I am working on, but I cannot find info in the manuals that I have.

Started off as a Tier 1 network, 2 lan controllers attached via ethernet. Have removed the Ethernet, moved the 2 lan controllers close enough to run it as Tier 2 networks, using the main network...

I am having communication problems on one of the 3 networks, which eventually causes the LAN Controller to reboot. I have a copy of ANALYZER and am getting errors, the main one that crops up is RIB...

In programming on the KMC, the word CON is used as con4, con5, etc. I cannot find the definition on what it is used for, can anyone help?

would really appreciate you sending them, address is now in profile


thanks

my bad KMD 5210

Have an issue with 2 5120's not communicating over ethernet. I can't even ping them. I have put both in the routing table with HCM and have attached them to a NetGear switching hub. I have my...

Thank you for the response back.

I will be adding more repeaters to the network, but wanted to know why, one network performs well and the other does not. I know how I can fix it but really...

Inherited KMC network with problems, mostly communication. Have read article about devices on a network, that are the equivalent of 1/8 or 1/4 of a network device; the majority of devices that I...