Search:

Type: Posts; User: HoFiveO

Search: Search took 0.01 seconds.

  1. Here it is broken down by Each Component, w/...

    Here it is broken down by Each Component, w/ selections and sq. ft.
    First one is Average seal and orig design temps from HVAC-Calc
    Second one is Best seal and orig design temps from HVAC-Calc
  2. In "Post #28" with the attached files the temps...

    In "Post #28" with the attached files the temps for outside are the ones from the HVAC-Calc, the inside temps maybe will change. I may play with them today. We usually set stats summer at 74 and...
  3. I will be using 2 units(2-furnaces and...

    I will be using 2 units(2-furnaces and 2-condensers). What size recommendations do you recommend for single stage condensers and dual stage. Furnaces I will use ColeMan 60,000 BTU 9.C 1200CFM. What...
  4. If I go with Coleman Furnace with Modulating...

    If I go with Coleman Furnace with Modulating Valve will that help with the oversizing of the furnace and help with the air being pushed thru pipe, I think the unit said 1200 cfm?
    Or wood the Two...
  5. Size recommendations for condensing units....

    Size recommendations for condensing units. Downstairs has duct that goes long way' does it make diff.
  6. Sorry, here they are with sq ft first is average...

    Sorry, here they are with sq ft first is average seal and orig design temp
    second is best seal orig design temp. thanks for you time and help guys!
  7. i caculated the new windows and a front door. Yes...

    i caculated the new windows and a front door. Yes i will use one furnace per floor.
  8. Here they are in attachments: first one is orig...

    Here they are in attachments: first one is orig design temps with best seal and insulation, second one is orig temps with average seal and insulation.
  9. I bumped it 3 up for both wint and summer. I...

    I bumped it 3 up for both wint and summer. I guess I can get (2) two ton cond and (2) 60,000btu Coleman 9.C
  10. Just trying to get best info so I can make sure I...

    Just trying to get best info so I can make sure I get what is Necassary.
  11. UPdated

    I purchased the HVAC Calc for Home Owner. Did all measurements. I will be adding High Eff. windows and doors soon after HVAC Install. So they are consistant in both attachments. Only differances are...
  12. Thread: HVAC Calc

    by HoFiveO
    Replies
    4
    Views
    365

    thanks for the info. i think my installer did a...

    thanks for the info. i think my installer did a decent job, just no way feasable to redo the mistakes from time home was built.
  13. Thread: HVAC Calc

    by HoFiveO
    Replies
    4
    Views
    365

    Is it better to do a whole house calc like in the...

    Is it better to do a whole house calc like in the instuctional video or go room by room for each floor. In my front entrance the cieling is to second floor, open area. How to calculate this. I will...
  14. Sorry! I forgot, newbie mistake.

    Sorry! I forgot, newbie mistake.
  15. The Coleman 9.C is Modulating not 2 Stage. Yes...

    The Coleman 9.C is Modulating not 2 Stage. Yes Honeywell has one you talk to to program, saw it last night, called Prestige - range. I will go with Vision Pro 8000.
  16. I will use the coleman 60,000 btu 9.C to save a...

    I will use the coleman 60,000 btu 9.C to save a little money. So I can use a single stage t-stat and that would be as effcient as a dual stage programmable, stripped down model. I would like to take...
  17. Thread: HVAC Calc

    by HoFiveO
    Replies
    4
    Views
    365

    HVAC Calc

    Does the trial let you do one full home calculation, for like me a homeowner to make sure i get the right size equipment from my installer?
  18. Well I just had a new roof installed with Ridge...

    Well I just had a new roof installed with Ridge vents and soffit vents and they closed the gable vents and the installer suggested atticfoil.com be installed. I am planning on installing that(less...
  19. OK, I will let him know. He is going to reuse...

    OK, I will let him know. He is going to reuse some duct(hardpipe) anywhere he can from what is up there(removing what is not necassary). He will add flex and what ever else to finish it right. He is...
  20. Yes. He is going to put new plenums and modify...

    Yes. He is going to put new plenums and modify alot of the duct work to make sure I get enough air through the duct for down stairs. He said the registers downstairs are not enough and in installed...
  21. So for the Coleman I can use a regular one stage...

    So for the Coleman I can use a regular one stage t-stat non programable. I prefer a non-programable. I am waiting on price differance between the two furnaces to decide which I go with, t-stats can...
  22. Thermostat controls? Goodman GMV95 or Coleman CP9C

    Hello, This is my first post, sorry if it is not worded or in order of correctness. I have read alot of posts and have a Great Installer that is A+ BBB and has been laying out deigns and systems for...
Results 1 to 22 of 22
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event