Search:

Definately a 2 man job positioning the heat exhanger and ripping the old one out.

Best advice i can give you, charge your screw gun!

i believe around 280/62 35+ superheat

really wish someone at trane would spend the extra few cents to put in a liquid port!!! ahhhh

Just wanna see if anyone has some advice!

I have a couple TSC120 Packaged cooling RTU's giving me similar issues.

Heres whats going on with one unit...

OA Temp 90 Degrees
Entering Coil Temp...

Short and sweet....X Belts work better for shorter diameter lengths. I.E.: Trane Precedent units with those 26,32,35 length belts. you absolutely cannot get away with a typical A or B belt if the...

Funny question....Is this unit T-Stat controlled or BMS controlled....If it is BMS controlled(Tracer Summit/Tracker etc.) and has a comm card, disconnect the comm card and isolate the unit. Its very...

Anyone ever work for them???

Anyone ever work for them or have any personal experiance?

Couldnt wait to use it....i went to a building to make some adjustments to a CCP and snuck outside and tapped it on to check gas pressure...THANK GOD the water filled yellow jacket will rarely if...

Yea well get this... we have a new install we just recently commissioned, specific room temp to be maintained was 86 degrees....construction companys maintenance contractor comes in and takes...

Ideally im liking the 179/902 combo...so if the 902 does microamps, im good, while the 179 will take care of my ohms over 10k.....im liking it

it was either the 116/62 combo with a 902
OR
a...

ehhh just saw it doesnt look like the 179 does microamps ehhhh

yea i know thats why im considering the 902 as a clamp on and as an extra meter... however the accesory current clamps for the fluke 179? would u reccomend them?

deciding between these 2 meters....

i was originally sold on the 116/322 combo but now i just fell in love with the 179...

im thinking about just sucking it up and getting the 902 and 179 and...

Been working on a brand new 50 ton Voyager RTU with your typical gas set up, seems like the combustion fan does its normal thing with the high and low speed however there is a board and on the...

i dont work on many variable speed motors so i dont think the amp meter not being true rms will kill me just yet either

oh what to do....

my meter purchase is going to be between these 2

i like that the 902 is true rms but the resistance reading is limited at 0-9999

while the 116 does millivolts but the 322...

after much research and discussion i will be purchasing these 3 items over the next couple weeks...now only where to by them and finding the best price ;)

later will be the digicools or cooper...

My first question to you is:

What kind of controller are you using? Conventional T-Stat or a Trane Programmable Zone Sensor???

Secondly?

When you run the unit locally through test mode ,...

any reviews on the multi temp tester from cooper atkins? i was thinking about picking it up, but was curious as far as the accuracy and durability

i might sound redundant, just cant find anything on it that clearly states that it measures inches of water column negative

does this manometer also measure negative gas pressure?


i had a thread about digital manometers and this in fact looks like the one i would like to purchase.

what do you guys personally prefer to measure wet bulb/dry bulb and relative humidity... as far as digitially.... i know fieldpiece once again has a head that will measure all 3 but once again im...

Um not so sure where to go with this but u do want to keep your head pressure up at a decent saturation/condensing temp around usually 100 degrees and keep your subcooling anywhere between 10-20...

any reviews on this? as stated in another thread im looking for a digital manometer that reads negatives as well...i already have a fieldpiece stick meter and came across this accessory head with 2...

def looking at the lc, from the sounds of it the xl is just a little too big and the lc seems very comparable to the husky bag/pouch i have right now