Search:

Perfect fit for me if you were in philly


Sent from my iPhone using Tapatalk

added 5 VAV's with tracer summit. but new Vav's will not show on BCU display. added them to correct members area. they will show in the alarm log. I'm adding thru a remote connection to our office...

Figured. Does it matter if I use version 17 on a version 15 bcu?


Sent from my iPhone using Tapatalk

I'm adding 5 new VAV's to a tracer summit bcu. Ran the network wire and addressed VAV's. (Comm4) connected rover to new VAV's and I could see them. Connected rover at BCU link and could not discover...

the aprilaire 5000 is cheaper to maintain as far as media replacement costs. Both are good air cleaners. I would go with the aprilaire 5000

we use air braces to prevent ground settling. has a bracket mounted to foundation walls for new construction

stay away from window shakers. If your gonna do it, Do it right 2 systems. Hv is more expensive and less efficient. If you have the attic space put standard duct system in

I would guess the new windows are saving you money as we speak!!!!!!

lennox recomends using the approach method but sh and lsc work fine also

Try setting your fan on the thermostat from auto to on constant air circulation will decrease the temp diffence by half in some cases. Downside will increase humidity in home slightly during off...

Carrier has 5 yr standard parts warranty just use carrier dealer part will be covered but you'll have to pay labor. I'm gonna print this thread next time a customer wants to buy from sears over 100...

sounds fine 80 250 18 degree split. suction may be slightly high but with the b.s info you gave sounds fine.

If the house is cooling i would say your probably fine. check the temp drop across the coil.

the suction is to high. I agree wrong metering device.

the blockage is the txv resticting flow of refrigerant into the coil which will freeze the distributer lines. sounds like a bad txv. when you replace it put the nex filter drier right b-4 the new...

3" static your contractor is a yahoo get another contractor. he's uneducated on the equipment you want. he should just say he is not familar and do some research.

lennox 2 stage variable speed

http://www.ceehvacdirectory.org go to this site and type away it will tell you if it's a ari match

lennox hsx15 my fridge is louder, just hooked one up last night

nice work. our sheet metal shop makes pans for the size of the pumps. if no pan then we at least bubble wrap the pump resovoir to prevent sweating. Nice zoning panel but i would invest in a label...

Keep doing what your doing. I have been known to use stay brite on occasion when the joints were already soft soldered. but in general brazing with nitro is the way to go. i think oxy is overkill

Lennox Signature stat I have one on my unit works very well. Also carrier thermidistat

Lennox makes a 1 1/2 ton 13 seer hs26

i believe one sg inch per 1 k of btu input is the formula for tranfer grilles. ex. 120k= 120 sg inches

looks good!!!!!!!!

it can be done and it is illegal you CANNOT derate a furnace

1300 sg ft in philly w/ 2ton new home
17 1/2 tons is ridiculous

did anyone pick up on the power humidifier in the attic WTF. sorry dude but that looks like garbage move this thread to to the wall of shame

i believe the venting in illegal lateral run can not be more than 1.5 feet per inch of diameter of pipe. but job and metal looks great.

put a ice pick in his coil he'll have to replace it then noise gone

ServiceMark

damn it and i live only 28 miles from there

yes buy it

i've worked on them there ok. looks kind of cheap.

looks good so far

priority service and properly and safely running equipment.
why do you change the oil in your car????

I agree.

so do we have a verdict yet?????????

problems with that blower brd i believe it's a 48k98 bcc3 brd.

above eye level point up below eye level point it down

Let me Guess the thermostat was just replaced and now you have this problem

you can run up to 140 degree water in that humidifier

Connect to hot water. Also check for any fireplace flues that are open a flue that is open can reduce humidity by 50%.

you need to be a dealer to buy the equipment. How did you make out with your new heat pump????

i Would suggest if problem continues have a hvac guy change control.

take a picture and post it

you need 50 cu ft per 1,000 btu's input

no Sweat!!

http://www.imagewiz.net/usr/hvac/289_ask-tom.jpg

[QUOTE]Originally posted by doubleshot
[B]Thanks you guys, I fixed the ignition problem with it not igniting. The wire that ran to the ignitor needed to be trimmed then I twisted it back on and it...