Search:

new comp x4.if money is what it takes to fix it then so be it.

add high side port and weigh in charge to get close. not to be mean but is basic refrigeration.

sounds like your rack is undersized.shut down a couple systems if thats possible to see if that helps.

could be a freezer???

409

x2 for propane. good luck trying to find ref grade so-2

4 hours??

black to black and white to white! right? its that simple. just joking but seriously AznR3DnecK make sure you remove the solenoid head from the valve body when you first apply power lol!!haha

holy crap

2

if you dont know anything about coolers than why is he calling you to fix it?? maybe you should just stick to eating the pizza. just dont get sick from the spoiled product hes keeping in the cooler!

if you pulled the correct micron and have correct charge in it and all checks out ok with the condenser id lean towards compressor.did you try pumping system down> your high side should not rise...

i live in upsatate ny and have never ran across any natural gas copper lines.have seen a few soft copper propane lines.i guess if it is allowed by code whats so wrong with it especially if you braze...

yes cap tube most likely plugged and compressor will probably be dead now also. (good luck)

yes cap tube most likely plugged and compressor will proabably be dead now also. (good luck)

not to be a jerk but if you have been working on a/c and walk ins (for 7 years) and you have yet taken a super heat reading is a little scary.

you should take the super heat temp where the sensing bulb for txv is located on the suction line.you want a super heat of 5 to 7 degrees correct me if im wrong anyone.

you have ice build up on the coil?? why do you say it overcharged? 275 at what ambient?

dont use that.thats only for beer will not work for a deer!! maybe you should call a professional??

new mexico or old mexico?

thanks for the replies ill look into that brand.

wow thats the dirtiest condenser Ive ever seen

man im lost for words on this one. just imagine working with the guy that did that and him telling you "hey lets put it here for better air flow" what the heck is someone thinking.

wonder if he charged his friends for the c/o buzz?

i was wondering what brands/types of heat tape people use and there method of how they install it on freezer drains.i have used a couple diffrent brands and a few diffrent ways of installing it and...

the extra/remaining refrigerant is stored in the receiver. the txv will control the amount of refrigerant to the evap coil.whether it is receiving 1 pound of freon or 500 it will only meter in what...

must have been a stupid ? i take it.

a little pvc glue will seal that right up.

wow

i was wondering if it is wrong to leave suction filters in the system permanently not the canister ones but the in line type sizes 3/8 to 1 3/8 or whatever.