Search:

Type: Posts; User: kamikaze126

Page 1 of 12 1 2 3 4

Search: Search took 0.01 seconds.

  1. well 141F was inlet condenser temp... I did a...

    well 141F was inlet condenser temp... I did a check and found 500 psi head on startup led to a quick bypass and overload cut out. This freezer was running 250psi last visit for 30 min and drop box...
  2. im also thinking 141 not a reasonable temp if not...

    im also thinking 141 not a reasonable temp if not impossible..... no rla on unit so not sure if 8amps could trip OL. obviously need to find some more info tommarrow
  3. 404A cap tube

    404A cap tube
  4. not shiny but no visable buildup. good airflow

    not shiny but no visable buildup. good airflow
  5. Victory vf 2 freezer 2door standup digital display

    Erratic operation complaints.. found working normally on 1st call. 2nd call find display erratic/ throwing 20 different 2 digit codes but nothing close to any actual trouble codes. just jibberish. ...
  6. Replies
    3
    Views
    473

    OK I knew there was a simple answer I was...

    OK I knew there was a simple answer I was missing..... so control cuts in at 39 and cuts out between 22F and 9F based on setpoint of dial...:beat: thanks for the reply
  7. Replies
    3
    Views
    473

    constant cut in controls

    Specs on constant cut in controls got me scratching my head alittle. warm off 22 , normaloff 15, cutin off 39 and cold 0ff 9 Im thinking SPST switch unit will restart at 39F. when will it stop 9F?...
  8. Replies
    53
    Views
    3,298

    yep that's the plan now that ive

    yep that's the plan now that ive
  9. Replies
    53
    Views
    3,298

    This is working out well also. The staff has all...

    This is working out well also. The staff has all informed me they notice the difference. Lots of comments on how cold the beer is . Bartenders are rotating reach in Stock with walkin stock at the...
  10. Replies
    53
    Views
    3,298

    Went back today and found still running @ 34F ...

    Went back today and found still running @ 34F SAC Thank you for your input works great! Wow lots of replies here. I'm putting BEER in all my thread titles. This cooler is only for bottle beer.
  11. Replies
    53
    Views
    3,298

    Went back today after 3 days. Big improvement in...

    Went back today after 3 days. Big improvement in temp 38F no ice on coil. Decided to put bulb inside coil anyways as it makes more sense. I am pretty well convinced that the unit is operating...
  12. Replies
    53
    Views
    3,298

    No timer I feel I could solve this with one also....

    No timer I feel I could solve this with one also. It just has a LP safety. and tstat. You know if I go in this place and condemn everthing he will never call me back. He has been burned badly in the...
  13. Replies
    53
    Views
    3,298

    Yep you are angry... this is not behind the...

    Yep you are angry... this is not behind the owners back, I dont have time to explain further thanks for the reply
  14. Replies
    53
    Views
    3,298

    He's got a goldmine.... must be the women

    He's got a goldmine.... must be the women
  15. Replies
    53
    Views
    3,298

    Thanks again for all the input but like i...

    Thanks again for all the input but like i said.....''Customer not convinced he has a problem here so any more logical suggestions involving $$ will have to saved for later"..post#1 "The bulb in coil...
  16. Replies
    53
    Views
    3,298

    Im not running a coil below freezing in AC. If I...

    Im not running a coil below freezing in AC. If I was and all I had was a tstat and sensor, I would put this sensor somewhere where it could cycle unit off before an iced coil could reduce capacity.(...
  17. Replies
    53
    Views
    3,298

    Trying to make me think and guess what the...

    Trying to make me think and guess what the problem is? Im married I am very familar with this . I do realize the bulb is best in the coil to avoid freeze ups. My thinking was take it slow and...
  18. Replies
    53
    Views
    3,298

    Coils clean and did a complete check, plain and...

    Coils clean and did a complete check, plain and simple it is cycling off on temp before the beer is cold. The bulb in coil is just to show customer some 35 -38F beer. The employees and customers...
  19. Replies
    53
    Views
    3,298

    Beer Cooler 45F beer

    Walk in cooler R22 customer has no problem with 45F beer I DO. 25 yrs HVAC but no Refrigeration exp. Im new to this customer and could make some big points here or loose also. Huge bar 300+...
  20. Replies
    13
    Views
    1,549

    thanks looks great exactly what I was looking for...

    thanks looks great exactly what I was looking for thanks again
  21. Replies
    13
    Views
    1,549

    Industrial light cover what material is that made...

    Industrial light cover what material is that made of? Plus why hinges? Can u post a picture?
  22. Replies
    13
    Views
    1,549

    I was thinking of thin unistrut or even thinner...

    I was thinking of thin unistrut or even thinner steel channel but figured if i asked someone on this site had experimented with this and i could benefit from their trial and error.
  23. I am hoping its not a big deal I get alot of...

    I am hoping its not a big deal I get alot of great HVAC help from this site and dont want to be blacklisted... oops is blacklisted OK? no harm intended ThankYou
  24. I Knew when I posted this I was going to...

    I Knew when I posted this I was going to offend someone. I should have erased it then. Where I'm from this is so widely abused it really aggravates me. I don't Own a gun I never shot anyone nor do...
  25. Replies
    13
    Views
    1,549

    Van" Ceiling Shelf"

    Any ideas to lower inside van ceiling using that space created for small ladders, lineset rolls, pipe lengths, foldable hand truck Flat sheet metal ect. Kind of like raising the floor but from...
  26. Replies
    70
    Views
    14,110

    I love it also, always wanted something for...

    I love it also, always wanted something for access tees for pressure controls. Been using it for about 10 years It was extremely hard to find. Just recently its a little easier but many vendors...
  27. You guys are all showing your age with the corny...

    You guys are all showing your age with the corny jokes I love it !!!
  28. This might help ....If I have to be drug tested...

    This might help ....If I have to be drug tested in order to get and keep a job to pay for everyones welfare. Everyone on welfare should be drug tested BEFORE they are issued each check, housing...
  29. Replies
    11
    Views
    1,036

    thanks I also found an old thread with a link to...

    thanks I also found an old thread with a link to the TRUE service manual. lots of help there like step by step removal of top of cabinent , t-stat and relay.
  30. Replies
    11
    Views
    1,036

    The problem always seems to be it just stops...

    The problem always seems to be it just stops working. When I go to check it out everything appears normal. A few of them had tap valves already installed I'd watch it for a couple hours everything...
  31. Replies
    11
    Views
    1,036

    [QUOTE=craig1;16366481]As far as I know, yes. ...

    Just the guy Id need.If you can help that would be great. I just got a new account im trying to land. Huge Sports Bar/nightclub/Banquet hall(s) /restaurant. Mostly HVAC rooftop units, Walkin...
  32. Replies
    5
    Views
    657

    its a freebie so im thinking what are possible...

    its a freebie so im thinking what are possible problems with a generic ? mounting , wiring , water flow rate?? too much or too little going to make a dfference?. longevity not a big concern...
  33. Replies
    5
    Views
    657

    Scottsman SCE170

    Scottsman SCE170 has a bad pump. ice machines not my specialty. Favor for local firehouse. The factory pump $275. I found Little giant universal replacements running $65 to $135. Can I get away...
  34. Replies
    0
    Views
    345

    Scottsman SCE170

    Scottsman SCE170 has a bad pump. ice machines not my specialty. Favor for local firehouse. The factory pump $275. I found Little giant universal replacements running $65 to $135. Can I get away...
  35. Replies
    204
    Views
    33,415

    I have the new dewalt 20V LED its awesome

    I have the new dewalt 20V LED its awesome
  36. Malco FDC3 Multi-Purpose Flex Duct Tool

    worth the $60?
  37. Replies
    26
    Views
    3,725

    Ive always used only 15%, but 15% too high now....

    Ive always used only 15%, but 15% too high now. Went to dynaflow then 5% I find dynaflow doesn't flow as well as 5%. Cant speak for joint strength but never found a leaking brazed joint unless it was...
  38. Replies
    20
    Views
    2,893

    mines beer:cheers:

    mines beer:cheers:
  39. Replies
    20
    Views
    2,893

    I definitely understand the coil below freezing....

    I definitely understand the coil below freezing. as an A/C guy I have to get used to it. Like stated lack of moisture in box makes it much harder to freeze coil. In an A/C application that same coil...
  40. Replies
    20
    Views
    2,893

    The burn was minor so after removing compressor ...

    The burn was minor so after removing compressor I just flushed from open discharge line thru closed discharge service valve and from suction valve thru open suction line followed by nitrogen purge....
  41. Replies
    20
    Views
    2,893

    Yes 10 ft up up roof and all insulated. I had 10F...

    Yes 10 ft up up roof and all insulated. I had 10F superheat @ compressor never got one @ coil exit but i do see refrigeration literature asking for it. Due to short run And 1 large long coil i didnt...
  42. Replies
    20
    Views
    2,893

    r-22 med temp

    Picked up big hvac account with a cafe. I havent done much refrigeration. Right off A compressor for the walk in cooler is shorted. Minor burn I cant find cause. so I do New comp 3phase 41000 btu,...
  43. Replies
    11
    Views
    1,765

    thanks problem solved

    thanks problem solved
  44. Replies
    11
    Views
    1,765

    sealrite or similar no loss couplings

    Anyone having problems with sealrite or similar no loss couplings.... 2 this year 1 a leaker and one just froze up tight will not turn. They are expensive!
  45. Thread: Evacuation

    by kamikaze126
    Replies
    16
    Views
    2,538

    Maybe its a leak in the ball valve stem. I find...

    Maybe its a leak in the ball valve stem. I find that on ball valves for water the stem sometimes temporarily drips when the valve turned on + off.
  46. Replies
    27
    Views
    6,865

    I have sold 100's of C3 C5 C6 C7 coils in last 5...

    I have sold 100's of C3 C5 C6 C7 coils in last 5 years with no problems. hope i just got lucky.
  47. Replies
    41
    Views
    3,422

    I found this site after 20 years in the field....

    I found this site after 20 years in the field. There is alot of info available here more than i have found anywhere else. I learn something here every time im on the site. I do not understand why...
  48. Replies
    41
    Views
    3,422

    no problem, (see post on no need to pull a vacuum)

    no problem, (see post on no need to pull a vacuum)
  49. Replies
    3
    Views
    531

    Where should I post?

    Whats the difference between tech to tech and pro forum? It seems tech to tech always has the most viewers?
  50. Replies
    34
    Views
    2,701

    I have great luck with a 30 year old H10B little...

    I have great luck with a 30 year old H10B little r22 proper calibration for leak size and it literally has never failed me.
Results 1 to 50 of 575
Page 1 of 12 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event