Type: Posts; User: JumpSteady
Thanks for all the input. Got it going.
Never mind. Found 134a sticker on evaporator
Found and fixes leak. Can anyone tell me what gas this walk in Cooler takes from these pressures?
Condenser fan cut in 200 diff. 35
Compressor cut in 28 diff. 20
High pressure cut out 350...
I just wanted to be sure it wasn't some weird proprietary size battery, thanks.
I am thinking about getting an sman2 or sman3.
What kind of battery does it run on?
Just don't reach down and accidentally unscrew the regular hose from the adapter while connected to a unit. Seen another tech do that, lose 7 lbs of refrigerant and pretty bad frostbite.
When I'm not logged in I can see pictures. But when I am logged in it shows a link and you have to click on the link to see pics. Also when I look at a thread it shows the last posted message...
Fluke 16 my frontline meter, but I have an Amprobe ACD-10 Plus I use for amps. I like it, mostly. I don't like it takes CR2032 batteries. I'd rather worry about keeping just 9 volts for my fluke,...
No. I only have one, don't have anything to compare it to. It seems to work as it should.
I've been using a Yellow Jacket 69080 Digital LCD Vacuum Gauge. It has bars that go from 500 to 750 to 1000, etc. I like it. It seems to work well enough.
Yeah robinair has red and blue too. But I don't think the color has any significance.
My friend has used the robinair 15500 5 cfm Vacumaster for many years. It still pumps down fine. But the switch did go out on it and he replaced it with a different switch. Personally I would have...
Still using my old fluke 16. I tried to use my friends fieldpiece one day on an electrical problem. Going down a breaker panel trying to locate a certain circuit, we had the wires twisted together...
That sounds good. My CLC is past due for replacement.
You have no idea! My before pics were actually after I precleaned it with the shop vac. That's why you can even see the coil fins in a few spots before I pressure washed it.
Most mobile homes don't have an outdoor spigot. So you can't use a hose. I can use this with a 5 gallon bucket and siphon kit if there is no spigot, as was in this case. Actually the only thing...
Been using this a couple years now. Works great. Thought I would finally get around to taking some pictures and video.
Haven't bought any nasty chemicals since I got this. I only use water to...
Yes it had power. It would try to start and the overload would click.
I can't say why, but it is my understanding it runs off the mainboard. I guess I'll find out when I replace the board.
The start start relay/run cap tested good. The condenser fan motor was not running because of defective mainboard. I believe over time this killed the compressor.
Yeah I agree. Thanks.
Yes that I did. It came with the new compressor kit, and I would change the filter dryer on any system with a compressor change out.
I only put a fitting on the low side, in the process tube. But I see your point. I'll try that next time, thanks.