Type: Posts; User: Servicepro
Search took 0.03 seconds.
Happy to hear your on the road to recovery Mr Bill.
With your strong family support and your freinds here there is a lot of positive
energy your way.
I wish you speedy recovery sir
Thanks guys for the input.
Just picked it up and so far feels good with the Bosch solid build to it.
Took a piece of steel in the vise and ground away. No problem. You guys are right, for a...
Thanks for the input, by the way were are you located, as you can see I'm in Alta
Its on sale real cheap this weekend and I am considering purchasing to throw in the van.
Probably be used for small type of jobs e.g.:cutting off rusted bolt, bearings. Small grinding etc.
Thank you Gravity & Nudrchiller
sorry I meant for this to be posted in commercial..can this be moved ?
Dumb question -
On a Trane RTU YSC102AWEMAOO1G
Reading the specs it shows:
2 Climatuff Scroll compressors
Refrigerant charge- Circuit 1 (7.9 lbs) & Circuit 2 (4.0 lbs).
These circuits are...
"Finally a Micron Gauge we can bring anywhere with us including the roofs in Alberta, eh!
Are you from Alberta?
I got to chime in.
I have over the years amassed a few monometers.
Dywer, UEI, YJ anolog and even a Dwyer liquid U tube. But for all the same reasons I'm reading from many replies I too very...
I am looking to purchase a FP tool online.
Who have you used and recommend that has provided good service, good pricing and free shipping in the U.S?
Thank you in advance
I know its like the tools magically dropped off in the middle of the night by the tool fairies
So Ive been searching for a molex pin removing tool. And by the many threads I've read on here, there is a lot of guys, also looking for one these tools too.
It appears the molex size commonly...
Can I join your family???
But under 1.0 micro amps and it only display "0"
Purchased one a couple years back and it would not read below 1.0 micro amps. So called
UEI and they confirmed its in the software that it will...
Ive been to a few calls were the overflowed water got into the furnace control board....water and control board bad marriage
Why is the overflow on the evapoartor coil not piped in?
What happens to the water when the primary drain plugs up?
This is a great wrench because it opens real wide and is thin.
I believe if you google channnel lock it comes in different sizes.
My fav wrench
Heres a great adjustable wrench.
Thin and opens very wide for its size.One of my fav tool in my bag.
Ever try to adjust the manifold pressure on Moble home furnace gas valve?
Well they have the little spring pin protruding up the middle of the sloted adjustment screw.
The only way I can turn...
I could use a installation/service manual .pdf for
Majestic DV 360 RFN
Thank you in advance
Didn'y read the installation manual did you?
Last 110K furnace I installed, it asks for the 5" Bvent.
You have to transition right off the furnace with a 4" to 5" increaser.
Of course the 4"...
Customer has a Model 7000N
I suspect its a bit older but there is no fan inside it , looks like the wrong gas control in it.
So does anyone have a .pdf for parts or service on this paticular model?...
Hi Norm 01
First I have to agree with you in that you will have to keep looking and searching for a HVAC contractor who understands the importance of a Load calculation before proper equipment...
In our region I believe the entire ductwork and furnace would have been enclosed and fire rated. At minimum all duct joints should be sealed.
Is duct insulation wrap required...
Love this type of topic.
If any can post some Clear pics of your setup on jobsite in action that would be great but more important- Educational.
Hats off to all of you for really demonstrating...
Do you have some closer pics of the connections and set up.
Loved to see it.
And I disagree....how can a good job like this be overkill??
Great Job Baldie
Ha Ha thats great Uniservice
You better post a pic of that classic:)
Love to see it!!
Got one of those.
Just love it!!
Saves room in my Veto and it fits most gas valve boss.
The work itself looks neat enough Seaton.
But I have to ask why the odd configuration of the return duct connection.
Forgive me as I am only going by the pics but was it possible to place the...
Here is a picture of my old school Honeywell Millivolt meter.
I really like this old standard and can't seem to part with it.
What I was wondering if anyone would have the owners...
Also big kudos to you:)
Thats a great review you posted. Very well written and great pics.
I hope more reviews such as yours will be posted on products in the future.
just asked because I got a weird reading on a no pilot call. But yes you're correct it reads very well in Auto range or at the lowest setting.
I just recently purchased a...
Can the HS36 read millivolts as in a pilot light thermocouple?
I really wish I was there. Loks like fun.
Where is next year to be held at?
Have fun all
The Job looks fine.
No criticism , just a question.
I know in different regions there is different codes, so Im assuming the vent connector shown is from a HWT? If so, what does...
That is a temp test gauge obviously
Disregard the gauge comment
Since you posted and ask for feed back.
Im sure you did your best to ensure this installation is operating as it should.
But perhaps you are open to some thoughts.
1 - Not sure what the patch...
I'm surprised that you feel a 20" x 8" is more than big enough for this AC/furnace installation.
Granted we cannot see what the total equivalent ft is on the R/A trunkline but I guess from my...
"I had a Rheem mod installed in December. Initially it was wired incorrectly because the instructions that came with the stat were misleading wrt the "W" lead."
Could you explain this...
What size is that unit?
Are you sure you are following the manufacture venting guideline?
Just wondering why you would install nice sheet metal upgrade on the supply but reinstall that rotten rusted return drop and shoe.
It would have made the job look great, now the...
I am doing a quote for job.
25 year old home
Bungalow - 2 furnaces with seperate duct systems.
House is presently zoned by one furnace covers half of main floor and basement and...
Nice to hear a little perspective from a fellow Albertan.
It is entertaining to hear the same problems from techs but in different regions in N America.
But I must admit that I do...
send us a thread to lets us know how you make out?
All with the exception of one went well. The one with the rotted chimney, I just had to cut the bottom part of the chimney away to remove the chimney so the bolts could be accessed....
I am a participating dealer in western Canada.
The labour allowance for these upgrades I find is fair.
I would like to see a bit more for the travel, but I have been trying to group calls in...
You cannot just arbritrarely assign a number value to ductwork!!
Where are you getting your .1 from?
Are you saying all duct systems are the same?
You must read your fan performance...
20" x 6" drop ducts???
At .1", ARE YOU SURE?
You understand its all related to the total equivalent ft.
Your duct calculator is based on per 100ft.
What is your total equivalent ft of each of...