Search:

Anyone do any VAV airflow reset's based on zone Humidity?

EX: Zone is satisfied(70) and within deadband. Air Handler is in economizer and supply air setpoint is up around 69-70 degrees. OSA is...

JCI is the best!:Yeah censored: right! Try Automated Logic or Delta Controls.

Tell Dan to use SCT.

Well said Auto!

Anyone have a good MOP they would care to share. I am tasked with coming up with a MOP for PM's, Calibrations, etc.

Here in the Bay area the NAE is sold by the local supply house. RSD/Total Control. I worked on quite a few NAE's and I agree that they are limited but they work well and as said anyone can set up...

mtcpip:/uint/46001/11/192.168.1.24
Thats how the integration points showed up a few weeks ago..
drv_melgr_mb_multi_2-18a-002.driver is the rite driver for modbus
Dont forget to buy Energy Reports...

Today I began working on a Spinwave setup we are implementing via Modbus tcp/ip. Seems to work well.

I am with Bill. The Apple stores use the ACI button sensors and you would not know they are there

FYI, if you cycle power 5 times in a row you have no more program..... True story

I've only done a few DX's. I'll try and help...
If RWT is less than 72°F
Then output 7 mA.
[enables the boilers, which run at their pre-programmed values, proven to work just fine]
If RWT is...

Just finished a BCI-I on a ALC Webctrl 4.1 setup. Kindof a pain in the a__ as the Trane guy did not enable the points or change the units from imperial to standard. I did get their Bacnet setup...

I use VM Ware and it works fine for all my legacy sites so far...

I've seen it in R2 successfully. But I am no Tridium guy.. Good Luck

Why not go new? The price is really not all that expensive, and in you're case (2 out of 4 compressor failures) I would say a must.. If you are having these problems why not look at an alternative....

157571

Just connect it!!

Go to tools. Configure display.
Then you can define the idle order. So when viewing in the idle page(idle page does not scroll) You can put them in youre own order

Wow that's a big site. I have one site with 26 NAE45 and ADX of course. No problems with communication though. What version are the NAE's at? Also are all NAE's the same version? Little more info.

8.08B is the latest version

No Rover man, Hyperterminal. Just worked on one last week. J/K, dont know bout Rover but Hyperterminal is the way I did it. You can buy cable and adapter at any Trane dealer.

What do you need a FEC for? Maybe I can help you out

Let us know what youre supplier comes up with!

check this maybe it will work for you

Thanks for the replys!!
it looks like this. I know its kinda small
http://img.alibaba.com/photo/107981243/Carrier_Reciprocating_Water_Cooled_Chiller.summ.jpg

sounds like you need help.

NAE55 is Windows XPbased and uses the IPtracker
NAE35, NCE25, and I believe NAE45 are all Windows CE based and you need to use the information and configuration tool(NUT Tool)
That is why the IP...