Search:

Type: Posts; User: Baycienda

Page 1 of 4 1 2 3 4

Search: Search took 0.01 seconds.

  1. If you would like to have a childhood flashback...

    If you would like to have a childhood flashback of your older sibling twisting your finger around your wrist just carelessly chuck a step up or uni bit in a high tork corded drill while wearing a...
  2. Replies
    39
    Views
    1,349

    If you're worried about a sporlyn filter drier...

    If you're worried about a sporlyn filter drier rusting you'll have to worry about 50% of the brands on the market. It could be worse, it could be a roto lock on a compressor. All the brands are built...
  3. Replies
    48
    Views
    2,130

    What do you think they used before PVC? Wood? It...

    What do you think they used before PVC? Wood? It doesn't make the water red. There is some rust sediment, but very little. A lot of residential homes have black iron well piping.
  4. Replies
    48
    Views
    2,130

    I'm pretty sure the reason they are on there...

    I'm pretty sure the reason they are on there installed is for well piping. There are a lot of wells that are ran with just black iron steel. What they do is put the pump on one side, send the pipe...
  5. Replies
    48
    Views
    2,130

    The name for them that we've always used is black...

    The name for them that we've always used is black malleable merchant coupling. The other guys are right. The reason they should not be used is because they don't taper in the center and they have a...
  6. Replies
    32
    Views
    5,577

    I wouldn't worry about the neighbor. He can still...

    I wouldn't worry about the neighbor. He can still put it on craigslist and get good money out of it. Slightly used AC unit...
  7. Replies
    20
    Views
    3,145

    Incompetence doesn't discriminate against age....

    Incompetence doesn't discriminate against age. From 15 to 50...its all across the board. It definitely looks like more than just soot from brazing without nitrogen. Its going to take cutting out all...
  8. Replies
    19
    Views
    1,440

    If you want to save money on Schrader caps and...

    If you want to save money on Schrader caps and valve cores, try to get the installers to save them. Usually there's a couple of extra caps and valve cores on an install.
  9. Replies
    21
    Views
    1,899

    There are a lot of residential condensers that...

    There are a lot of residential condensers that have a built in time delay. It could be a little 2"x2" square board or a 2"x2" black box. But the main thing is to inform the customer why there is a...
  10. Replies
    33
    Views
    3,870

    Its worth it to run a sawsall down the steal...

    Its worth it to run a sawsall down the steal plates. But then again, it can be a task and blades aren't cheap. But what I've heard, is you can take a torch (I don't know the name of it) its a wand...
  11. Replies
    0
    Views
    464

    Pneumatic Cylinder Question

    I've heard of sheet metal shops running automatic nippers or corner notchers and I'm getting ready to build a new table for running duct work. It will be approximately 3' x 20' with a lock former in...
  12. Replies
    21
    Views
    1,806

    With running 5/16th on the liquid line instead of...

    With running 5/16th on the liquid line instead of 3/8th there will be a higher head pressure. By under sizing the liquid line you would think the extended head pressure would hurt a compressor some.
  13. Replies
    7
    Views
    752

    What's wrong with Sporlan? You know that a lot of...

    What's wrong with Sporlan? You know that a lot of the equipment manufacturers use Sporlan parts.
  14. Replies
    14
    Views
    1,369

    Efficiency Standards Settlement

    Did anyone else read this? I'm assuming this just means we are putting off the changes for another year.

    "The terms of the settlement would vacate the current non-weatherized gas furnace and...
  15. Replies
    621
    Views
    113,927

    I just got to work in the morning and the boss...

    I just got to work in the morning and the boss says to go out and install a system that a guy bought. He said to bring an empty reclaim tank because it has a dead compressor. So I jumped in the van,...
  16. Replies
    43
    Views
    5,508

    I would not go with a cheap meter from a do it...

    I would not go with a cheap meter from a do it yourself store. Your back up needs to be just as reliable as the one you use. And I also would not buy a meter off of flea bay because there is a safety...
  17. Replies
    38
    Views
    7,997

    Hands down midwest. They beat the hell out of...

    Hands down midwest. They beat the hell out of wiss and I think all malco are are midwest snips with malco name on it.
  18. Replies
    18
    Views
    2,174

    At LEAST 24 hours before it breaks and you fall...

    At LEAST 24 hours before it breaks and you fall off. ;)
  19. Thread: Nut Drivers

    by Baycienda
    Replies
    47
    Views
    9,683

    Greenlee hollow nut drivers, Malco 5/16 and 1/4...

    Greenlee hollow nut drivers, Malco 5/16 and 1/4 (the orange and purple one). I wish the greenlee and kline shorty nut drivers had a magnet. I think I'll steal a magnet out of an old bit and hot glue...
  20. Thread: Smoking tax

    by Baycienda
    Replies
    46
    Views
    3,228

    I'm voting no for Prop B just because it hasn't...

    I'm voting no for Prop B just because it hasn't been clearly stated where the money is going. They say it is going to education, but that is pretty broad. It could be darn near anything. Its kinda...
  21. Thread: Smoking tax

    by Baycienda
    Replies
    46
    Views
    3,228

    Every convenience store in Missouri has anti prop...

    Every convenience store in Missouri has anti prop B literature. A lot of the convenience stores are saying that a lot of the money raised is going to go to the universities. I believe in a person...
  22. Thread: Winter Gear

    by Baycienda
    Replies
    24
    Views
    2,189

    Military polypropylene long underwear and top....

    Military polypropylene long underwear and top. Just wear a hooded work coat...if provided of course.
  23. Replies
    12
    Views
    2,086

    I didn't ask what the price was and probably...

    I didn't ask what the price was and probably can't tell you right now because its public view. The supply shop was very proud of them. They had them on the middle of the front counter, which means...
  24. Replies
    12
    Views
    2,086

    15% Sil-fos rings?

    I went into a supply house that I don't normally go into and they had the 15% silfos rings. I kind of looked at it funny and asked the counter guy "how do these work?". And he said for example, you...
  25. Replies
    16
    Views
    1,516

    Be careful blowing a drain out with nitrogen. You...

    Be careful blowing a drain out with nitrogen. You might have a homeowner sticking a stick in the other end of the drain trying to help you clean it out. Oops!
  26. Replies
    9
    Views
    1,768

    They need a taller return air support box. Its...

    They need a taller return air support box. Its going to have bad air flow going into the bottom of the air handler. Just from what I see, I'd take some of the insulation off to see what the...
  27. Replies
    43
    Views
    5,029

    I always hated taking care of the bosses chores....

    I always hated taking care of the bosses chores. It was everything from mowing to picking up kids toys in the yard. But there was always 40 hours. I was mixed on taking the 40 or calling it an early...
  28. Replies
    38
    Views
    3,819

    Do any of you know of any threads where it has...

    Do any of you know of any threads where it has been discussed pumping down microchannel coils?

    By using the condenser and compressor to pull the refrigerant into the condenser with no ill...
  29. Replies
    28
    Views
    2,556

    I agree. Documenting it and getting at least the...

    I agree. Documenting it and getting at least the contractor to review and sign it. Lots of times I don't even know who the homeowner is. Its one of those things where the contractor says just go get...
  30. Replies
    28
    Views
    2,556

    Thank you Gravity and Pete! I'm an Iowa boy...

    Thank you Gravity and Pete!

    I'm an Iowa boy with my little boat named Baycienda.
  31. Replies
    28
    Views
    2,556

    Thanks Pete! That's exactly what we were looking...

    Thanks Pete! That's exactly what we were looking for! Believe it or not there are people out there having the same issues and thats why hvac talk is good and we need to keep it the same. Its not all...
  32. Replies
    28
    Views
    2,556

    Walking away is easy...I prefer to be...

    Walking away is easy...I prefer to be professional and get the job done and do it correctly. I can do it and yes, I am a new business owner. I'm young. Its easy for an employee to sit there and say...
  33. Replies
    28
    Views
    2,556

    I appreciate your responses. I understand put it...

    I appreciate your responses. I understand put it in writing, but how do I convey that to the quick contractor, concrete guy, or landscaping guy who wants to move the condenser and that is not going...
  34. Replies
    28
    Views
    2,556

    Yep, I agree with you, but we are talking about...

    Yep, I agree with you, but we are talking about the original question. How do you state it?
  35. Replies
    28
    Views
    2,556

    Thank you for the responses. We know we need...

    Thank you for the responses. We know we need something in writing, but we are having a hard time wording it. This is about disconnecting refrigerant lines, high voltage, low voltage, having a...
  36. Replies
    28
    Views
    2,556

    This is not a bump... We just started out this...

    This is not a bump...

    We just started out this spring and this is a valid question that a new hvac company has. I would like to think that hvac talk isn't a politically based forum. I'd like to...
  37. Replies
    28
    Views
    2,556

    Disconnect Condenser and Reconnect

    We recently had a call from a general contractor wanting us to disconnect a condenser so a concrete company could poor new concrete and then go back and reconnect the system. It was an older system,...
  38. Replies
    22
    Views
    3,933

    My experience with them is that you need to be...

    My experience with them is that you need to be very careful. I've had a brand new recovery tank with R-22 that came from a couple systems that ran for years. Put it in the shop, let it stabilize for...
  39. Replies
    19
    Views
    2,328

    I'd go ahead and pull the coil and drain pan....

    I'd go ahead and pull the coil and drain pan. You'll be able to clean it a lot better and get air flowing through it and fins straightened out and be able to inspect the drain pan really well. Its...
  40. Replies
    9
    Views
    1,401

    I like the UEi G2 Phoenix DL389. It does just...

    I like the UEi G2 Phoenix DL389. It does just about everything...ohms, volt, amp, capacitants. The temp probe is k style which I don't overly like so I bought a thermo couple from cooper adkins and...
  41. Replies
    11
    Views
    1,563

    Just like what was said before, almost every...

    Just like what was said before, almost every manufacturer makes them. Its a lot cheaper than running to a 100 amp box and running breakers and wire. I'm having a hard time finding the name for this...
  42. When those Carrier Bryant ceramic thermosters...

    When those Carrier Bryant ceramic thermosters explode they make a heck of a black mess. You don't want to have to change one of those out and go to a bid, thats for sure. There's a whole lot of magic...
  43. Replies
    102
    Views
    15,967

    302961 I think it is manufacturers trying to...

    302961
    I think it is manufacturers trying to push the edge of cheap to sell more. I also wonder if you were to tell a customer "yeah, the system costs twice as much, but its twice as good" if they...
  44. Replies
    416
    Views
    33,609

    You guys think that walmart is big right now,...

    You guys think that walmart is big right now, just wait until they launch their next project. Just west of Fayetteville, AR (close to walmart's base) there is a little town called Lincoln. Walmart is...
  45. And just how many psi constitutes a low system?...

    And just how many psi constitutes a low system? And how low on microfarads can you be before you burn up a fan motor and compressor? Be very careful. Your system is damaging itself. If it can be...
  46. Sorry about my comment, just realized this is...

    Sorry about my comment, just realized this is AOP. Please delete when found.
  47. Replies
    15
    Views
    3,198

    Looks a little different posting on the new site....

    Looks a little different posting on the new site. I've used both yellow jacket and master cool. Yellow Jacket seemed to be a little better built, better name, and quality. Be careful about using that...
  48. Replies
    102
    Views
    15,967

    A friend of mine owned his own heating and...

    A friend of mine owned his own heating and cooling company for years and then started working at a supply house. He quit that supply house and started up a different one. He has capacitors stacked...
  49. Replies
    14
    Views
    2,155

    I also took a full reclaim tank, set it inside...

    I also took a full reclaim tank, set it inside for 48 hours and checked the pressures and temperature on it. It matched up to a chart and it still failed.
  50. Replies
    14
    Views
    2,155

    One of the supply houses we use offers a buy...

    One of the supply houses we use offers a buy back. They'll pay you for R-22 that is 94% or purer. The only bad thing is you buy a new reclaim tank from them, fill it up with R-22 and you bring it...
Results 1 to 50 of 173
Page 1 of 4 1 2 3 4
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event