Search:

no he will just drive off trailing the cones behind like he just got hitched :D

they also make that meter under the crapman name. overall its a good value. but then agin i dont like flukes habbit of never making one meter with everything a hvac tech needs.

I have used my dewalt for a few fireplaces but it dose not have the capacity if you are looking at sucking out the lazy man ash shoots. There is one specifictly made for ash cleanup but i dont...

Ran into a new toy from Coast today at homy-D's its a flashlight stand/magnet has two legs that clip to most cost flashlight bodys can be flexed to use as a stand or magnets will keep it most...

I have had many Klein 6 in 1 and 10 in 1 have not had the 11 in 1. in comparison the the 6 and 10 in 1 kleins to the irwin the irwin is a tool the klein is a toy. have been using the same irwin for...

Irwin best built that I have found

http://www.irwin.com/irwin/consumer/images/large/2051100_lg.jpg

a nut driver is a hand tool like a screw driver. a nut setter goes on your drill.

lol :D:p:eek:

the sad thing is its true the space pen thing that is

most likly the brand harris 45 is a blue flux rod easy flow 45 is a non fluxed roll that you use stay-silv white past flux with. I do not know who makes the orange flux (maby sunkist :p)

the biggest consern on a compresor connection is vibration the higher the silver content the more flexible the joint will be. I would sugest harris 45 it is a blue flux coted brazing rod.

thanks for the info curmudgeon but I think I'll stick with my $100 veto LC.

just go all out and get a fenix tk10 with 225 lumens you dont even need the stun gun:D

looking for manual and wiring diagram for a lennox modle # cb19-51-3p air handler. homeowner/moron made a mess out of the wiring. Thinking about just making it work the way I would like but also...

I use ercolina benders every day and they are bomb proof but you need to be bending a lot of pipe to justify even the thought of these.

up to 3/4 we do by hand

7/8 through 1 5/8 we use the 070...

nice to see that im not the only refco user out there. Now i just wish they would make there star manifold in 4 valve.

I have used one one time I had no problems and did not see anything that screamed a problem waiting to happen. My personal one is a Bacharach it has never failed me except when i do something stupid...

The best gauges I have used are on my manifold now. Their Refco class 1 bellows gauges. They claim to be able to handle 2.5 times over pressure without effecting accuracy. they also have a nice...

No disrespect taken I myself will 9 times out of 10 take oxy/ace over Mapp but I do believe it has its place in your bag of tricks. Now most guys may never have the fun of climbing up a 40 foot...

Joe I beleve that I'm that certain member your taking about I wish i had a video recorder but I don't. All I can say is using a standard mapp cylinder and a bernzomatic TS8000 hand torch I just...

jojoe33 in truth to make a fully bonded braze with sil-fos 6 1425*F is all you need. there is no need to get a glowing red pipe for a full strenth braze you simply need to get the pipe hot enugh for...

Just how mutch heat do you think you need? Sil-fos 6 is the rod i use for most copper to copper it has a solidus melting point at 1190*F and a liquidu flowing at 1425*F. I would have no problem...

oxy/Mapp = 5301*F oxy/Acetlene = 5589*F or 288*F diffrence

Air Mapp = 3650*F Air Acetlene = 4350*F or 700*F diffrence

Thanks for the clarification I am a bit of a tool hog so i pack in more than you. So i simply rope up my prime bag with the filters and cleaners. the one tool you dont list that I tend to take to...

Mapp can be just fine for 7/8 with the right torch head. I have used it in a pinch at the end of a 40 foot extention ladder fixing a 1 3/8 line it worked but took a while. the secret to mapp is...