Search:

Type: Posts; User: captaincompressor

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. I have a Danfoss scroll in my Goodman Hp. I...

    I have a Danfoss scroll in my Goodman Hp. I installed it. The new Goodman GPD1448 started life as 4 tons. I didn't need 4 tons so I changed the compressor to a pve oil filled Danfoss 2 ton scroll and...
  2. Replies
    4
    Views
    337

    I ask the customer if they are more concerned...

    I ask the customer if they are more concerned with saving utility bills or being comfortable. Depending on their preference I will program it as FA or SL
  3. Replies
    23
    Views
    6,124

    Goodman is very popular in our area even on...

    Goodman is very popular in our area even on expensive homes. We have installed many Goodman units in a professional manner.
  4. Replies
    19
    Views
    3,087

    Try pex and crimps. Probably will do better lol

    Try pex and crimps. Probably will do better lol
  5. Replies
    8
    Views
    1,677

    Put the pressure in the green area and it's all...

    Put the pressure in the green area and it's all good lol
  6. I have an office building full of those.

    I have an office building full of those.
  7. Hate changing the HX limit switch in those.

    Hate changing the HX limit switch in those.
  8. Replies
    27
    Views
    2,842

    Water meter is in the house? Wth?

    Water meter is in the house? Wth?
  9. If the vent pipe is ran into the return, does...

    If the vent pipe is ran into the return, does this make a 95% = 99%? Lol
  10. New drier will remove the moisture from the oil...

    New drier will remove the moisture from the oil after a sub 500 micron evac.
  11. Replies
    38
    Views
    1,849

    It's a money racket. I was quoted $ for a...

    It's a money racket. I was quoted $ for a particular ecm 3/4 hp blower motor....wtf.
    They got a psc motor and a 90380 relay.
  12. Replies
    12
    Views
    855

    You can go to a 4" pvc sch 40. Take some...

    You can go to a 4" pvc sch 40. Take some stainless steel screen and wrap it in a 2" tube. Wrap it with more screen until it fits snug in the 4". Glue the other 2" reducer on it. Make it as long as...
  13. Replies
    44
    Views
    2,449

    Has anyone ever found the key to fit locked...

    Has anyone ever found the key to fit locked rotors? They should not put locks on them anyway. It runs up the electric bill
  14. Replies
    13
    Views
    986

    Shut the valve off and see if it drips. We're...

    Shut the valve off and see if it drips. We're they complaining about the water bill?
  15. Replies
    44
    Views
    1,452

    Residential sucks imo.

    Residential sucks imo.
  16. Not if it's on Saturday evening

    Not if it's on Saturday evening
  17. I would say the line set is short. Lol

    I would say the line set is short. Lol
  18. Replies
    11
    Views
    701

    As long as the suction line is beer can cold and...

    As long as the suction line is beer can cold and sweating it's working fine. Yall don't need no supercoolin or superheatin.
  19. Replies
    24
    Views
    1,511

    Just make the suction accumulator ice cream...

    Just make the suction accumulator ice cream sandwich cold.
  20. Replies
    31
    Views
    1,189

    Same here

    Same here
  21. While that's true, he has insurance that covers...

    While that's true, he has insurance that covers food product loss from power failures and equipment failures. He does not "claim" every time something goes down but one time the big freezer semi hemi...
  22. There's more than one way to skin a cat. More...

    There's more than one way to skin a cat. More fans and larger condenser will boost efficiency
  23. I would have but didn't have any rotary window ac...

    I would have but didn't have any rotary window ac compressors to use lol.
    So far my 410a compressor zp39k5e is still churning away on that open air cooler pumping R134A. 25SH at the pump before the...
  24. Replies
    19
    Views
    1,624

    I am a walking talking living breathing...

    I am a walking talking living breathing compressor analyzer. Be sure the suction line is beer can cold.
  25. Was the suction line beer can cold? Was it...

    Was the suction line beer can cold? Was it sweating?
  26. Put a 90380 relay on each speed. Wire them...

    Put a 90380 relay on each speed. Wire them together on a chosen single speed on the psc motor let's say medium or high speed. Don't try to use different low and high at the same time. That X13...
  27. When I put a new compressor in my home...

    When I put a new compressor in my home refrigerator, all I had on the truck was 163 driers lol. I pinched it down and brazed it between the liquid line and cap tube. Flow nitrogen when brazing g so...
  28. Replies
    20
    Views
    945

    I have retrofitted goodman boards into out of...

    I have retrofitted goodman boards into out of warranty furnaces. The boards and pigtails are cheap and work well. I keep a couple HSI and direct spark boards on the truck.
  29. I carry boxes of Q106's in the truck. This will...

    I carry boxes of Q106's in the truck. This will fix about any electric furnace.
    I had a fan relay bad on a modine old ceiling gas unit heater. I didn't have any 90380's so I put a sequencer on the...
  30. Replies
    17
    Views
    750

    424A is a good substitute also.

    424A is a good substitute also.
  31. Replies
    13
    Views
    716

    It sounds like a mix of a hp unit and ductless...

    It sounds like a mix of a hp unit and ductless minisplits may be your best option.
  32. I have manual reset HPCO 's on the compressors I...

    I have manual reset HPCO 's on the compressors I have changed. I would rather they lose some food than kill an expensive compressor or damage the refrigeration system.
  33. Replies
    20
    Views
    945

    I have a small business. I would have never...

    I have a small business. I would have never charged the customer a penny if the unit didn't run when I left.
  34. Smart thinking. We have a 5 circuit remote...

    Smart thinking. We have a 5 circuit remote rooftop condenser with 4 large fans. I think its a Bohn. I cannot remmeber. We have two fans that run continuously and the other two are staged on...
  35. Ouch!!

    Ouch!!
  36. And yes on the 440v cap

    And yes on the 440v cap
  37. I actually have a Johnson controls manual reset...

    I actually have a Johnson controls manual reset high pressure cut out on the discharge set at 300.
  38. It is good to know I can keep my old r22...

    It is good to know I can keep my old r22 equipment running with derrated zp 410 compressors.
  39. Very well lol. I have all the wrong equipment...

    Very well lol. I have all the wrong equipment doing the right jobs lol.
  40. I remember one in one of our neuco catalogs but...

    I remember one in one of our neuco catalogs but can't remember who made it or what it was.
  41. The "Beer can cold" Mad scientist did it again

    I had a copeland semi hemi on our little country store drop. It still had R12 in it and finally opened a winding.
    It was on a 12' 5 deck Hill open case.

    I had a copeland ZP39K5E laying in the...
  42. Sounds good. I have converted a couple older...

    Sounds good. I have converted a couple older units from X13 to psc. Never an issue. I used Goodman branded fan timer boards. They are dirt cheap and do the job.
  43. I am a contractor, what is the big liability?...

    I am a contractor, what is the big liability? Motor burns up? Ok the homeowner wants a new motor or You to male it wprk on your dime. A blower motor is not going to burn the house down.
  44. Replies
    20
    Views
    945

    We use them on equipment out of warranty. Never...

    We use them on equipment out of warranty. Never had any issues with them. I have wired a lot of universal icm boards and componet into furnaces and heat pumps.
  45. Same here except ecobee. Also blue screen 8000

    Same here except ecobee. Also blue screen 8000
  46. And make sure the true suction line is ice cream...

    And make sure the true suction line is ice cream sandwich cold on the heat pumps. Don't hook up the orange wire or they will have to dress heavy.
  47. Replies
    19
    Views
    1,181

    I just did a Txv on a Heritage 14. Same deal.

    I just did a Txv on a Heritage 14. Same deal.
  48. Replies
    11
    Views
    1,283

    In the computer rooms, we mount full sized pumps...

    In the computer rooms, we mount full sized pumps on the wall under the units. Those little compact pumps are quite buzzy.
  49. Replies
    4
    Views
    409

    Yes and warm like mom's apple pie in heat mode...

    Yes and warm like mom's apple pie in heat mode when the inverter is full speed. Just after a 15 min vacuum lol.

    I have an 18k klimaire cooling a produce cooler to 40 degrees.
  50. Awesome idea

    Awesome idea
Results 1 to 50 of 1000
Page 1 of 20 1 2 3 4

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365