Trane m#: Tch480a4oroa6kc5a
How should the dip switches be setup on the rtam board.
I would like to eliminate the ecomomizer from being used if possible.
Printable View
Trane m#: Tch480a4oroa6kc5a
How should the dip switches be setup on the rtam board.
I would like to eliminate the ecomomizer from being used if possible.
RTAM is for vav control, at the 4 wire plug on the econ. actuator just unplug it cycle power now it thinks it's an RTU without economizer.
Thx controldude!