Started own business
Hello all.. I'm a newbie to this forum and glad I found it.
After 22 years of working for someone else, I've gone out on my own..
I work in IAQ and HVAC Cleaning business (Yes I can hear it from you guys already) LOL. But I really do enjoy it, and I love meeting and working with new people..
I have many questions for you guys and I know I will have many in the future.. Looking forward to spending my downtime on this site :grin2:
So hear we go...my first question
On HVAC cleaning projects the blower needs to be removed at times. In the past my previous employer expected me to do this work even though I am not an electrician. I do know a lot about AC and DC electrical, but I believe in Washington State that you must have an electrical license?
Also, since I started my own business I want to do everything right.
I have emailed-called many of the HVAC business in my area asking them to work with me and do these "blower pulls" and even annual service on the furnace at the same time... And no one ever calls or emails me back??
Do you guys just hate HVAC cleaners or something??
Thanks in advance
Wow no reply as of yet. Learn to pull the blowers yourself. They are not really that hard to do. IF you are required to have electrician remove them.... move to another state (tongue in cheek), ok but really I would think?? you would be able to remove and put back a component not requiring a refrigerant handling certificate without running afoul of the powers that be.
I dont think you have to be a licensed electrician to pull the blower unless all hvac techs there have to be dual licensed. removing the blower is extremely easy in most cases remove a few screws if you have to buy several different colors of electrical tape and remove and mark accordingly. You are seriously making this harder on yourself than it needs to be.
Be sure to invest in a good fan puller. They are a life-saver!
I also keep a pancake compressor on my vehicle works great with a wire brush. NOTE: NEVER NEVER use air to clean blower in house, always take outside and wear a respirator.
I imagine in most states if pull the blower assembly you will be violating the state licensing board by not having a proper State Licence. The cleaning of the condensor coils and evap coils are a gray enough area you might slide by without a state HVAC licence.
Originally Posted by Premier Pacific