Drain Line Issue - Updated w/ PICS
Air-handler in attic
Drain line leaking somewhere in between 2nd and 1st floor.
Run new drain line.
The problem: I ran 20 ft of 3/4 PVC to the opposite end of the attic because it had easy access to drill in to the wall and add a drain outlet. The PVC is at an angle and the drain outlet is 8-12 inches below the handler line.
After the first day there was water in the opening after the p-trap and if I went to the outside drain and did a quick syphon the water flowed out.
Since the water was coming out the presumable breathing hole I added a temp plug but is this the best thing to do or should I do something different?
??? - Pic's are displaying here
I can see the pics just fine??..??I went ahead and moved the images to a different domain to see if that helps.
[Edited by gman69_1999 on 06-15-2005 at 03:02 PM]
This is your answer to your question
I had a problem with my drain line. Installer flat out did it wrong and I could not get him back out. Someone here pointed me this site at Trane.
I agree the line looks constricted. Maybe they tried to make the trap by heating the plastic pipe. You can make one from elbows very easily. See the link and good luck.