Printable View
http://www.goodmanmfg.com/consumer/s...dSite=Goodman#
Link to Goodman's 12 SEER unit. Click Product Specs. Scroll down to witness yourself that, depending on coil and furnace used, this so-called 12 SEER ranges from 11 to 13.
If I come across a document regarding the testing for ratings, I will post that as well.
This is not comparing apples to apples here. Please understand that I have inside knowledge on this one. It drives Goodman salespersons crazy that they cannot verify that adding a TXV or VS blower to certain systems will increase the efficiency even though everyone knows it must.Quote:
Originally posted by thighway
http://www.goodmanmfg.com/consumer/s...dSite=Goodman#
Link to Goodman's 12 SEER unit. Click Product Specs. Scroll down to witness yourself that, depending on coil and furnace used, this so-called 12 SEER ranges from 11 to 13.
If I come across a document regarding the testing for ratings, I will post that as well.
I don't see how this isn't comparing apples to apples. If you read the spec sheets, it clearly indicates where standard coils are used the SEER is lower, and where TXV / VS blowers are used the SEER is higher.
I also have inside info, just so you know.
Whatever the hell you want to believe thighman. If you want to believe that every capacity of a model of furnace has exactly the same round number rating, then you go right ahead and believe that.
I tried to give you an out because you are new here. You would be better off to know who it is you are discussing with before making a fool of yourself.
It's t highway, not thighman...
I'm not trying to make this a personal conflict, and you're right, I don't know who you are. Nor am I going to waste time looking into who you are before joining a discussion on this board. I also understand that furnaces do not carry the exact same to the decimal rating in all BTU ranges. I also understand that we have primarily been speaking about SEER to this point, which I have clearly indicated the truth regarding. If I make an untrue statement and am proven wrong....the beer's are on me!
Just because I am new to this board means relatively nothing. I am becoming an active member of this website because I love this industry. You also do not know who I am, nor am I making a fool of myself.
Quote:
Originally posted by thighway
It's t highway, not thighman...
I'm not trying to make this a personal conflict, and you're right, I don't know who you are. Nor am I going to waste time looking into who you are before joining a discussion on this board. I also understand that furnaces do not carry the exact same to the decimal rating in all BTU ranges. I also understand that we have primarily been speaking about SEER to this point, which I have clearly indicated the truth regarding. If I make an untrue statement and am proven wrong....the beer's are on me!
Just because I am new to this board means relatively nothing. I am becoming an active member of this website because I love this industry. You also do not know who I am, nor am I making a fool of myself.
Good Points!I think you are correct.
Quote:
Originally posted by RoBoTeq
The first thing manufacture reps are taught is to stick to the script and never claim fault unless their is a bulletin stating so.
ROFL!
Your in Mississauga?Quote:
Originally posted by thighway
It's t highway, not thighman...
My wife was born and raised there. Her Mom is still there, brother and family in Brampton.
Due to make a trip there in a few months...
"t" highway, my apologies for being so curt. I am used to people knowing my position which I am not actually allowed to advertize on Internet forums due to conflict of interest.
Welcome aboard and let's not let this thread be an issue.
Another little inside info "t" highway, dash will agree with anything to oppose me :D
Settle in and get to know some of us a little better. The main thing we have in common is that we are all prima-donna HVAC enthusiasts.
RWDQuote:
Originally posted by thighway
It's t highway, not thighman...
You also do not know who I am
Quote:
Originally posted by RoBoTeq
"t" highway, my apologies for being so curt. I am used to people knowing my position which I am not actually allowed to advertize on Internet forums due to conflict of interest.
Welcome aboard and let's not let this thread be an issue.
Another little inside info "t" highway, dash will agree with anything to oppose me :D
Settle in and get to know some of us a little better. The main thing we have in common is that we are all prima-donna HVAC enthusiasts.
You are paranoid,he' right and that's all there is to it.
Who ya talking to dash?Quote:
Originally posted by dash
Quote:
Originally posted by RoBoTeq
"t" highway, my apologies for being so curt. I am used to people knowing my position which I am not actually allowed to advertize on Internet forums due to conflict of interest.
Welcome aboard and let's not let this thread be an issue.
Another little inside info "t" highway, dash will agree with anything to oppose me :D
Settle in and get to know some of us a little better. The main thing we have in common is that we are all prima-donna HVAC enthusiasts.
You are paranoid,he' right and that's all there is to it.
You can't tell him who you are.............
can I or someone else? :D