Digital stat that are set by cycles per hour, check temp by tenthes of a degree, but only displat whole degrees.
At mild temps, they don't do 3 cycles per hour most of the time either.
And sometimes when they do, the on time may be down to 5 minutes.
So stats that are set by CPH, if you go from 3 to 2 on the cooling end of things, does that just widen the spread of .10s of a degree before kicking back on?
07-03-2008, 10:44 AM
They just increase or decrease their on off times to meet the CPH setting.
And if that means overshooting temp, or letting the temp rise higher, thats what it does.