Total Cost of HVAC Tools?

I ask this question because of what i've heard from my Autotech instructor, by the way I am NOT considering autotech as a career, I choose it so I can build my car for performance applications. Anyways he explained how he had to invest $27,000 in tools when he was an auto technician, which he further explained was nothing. He added on that the tool boxes to hold the tools cost about $20,000. I then researched their salary/wage , how their pay system works and I was appalled, FREE TOOLS wouldn't even convince me working as an automotive technician! At that moment, I had a better chance of joing the military than working as an autotech. These fears of ungodly expensive tools haunted me for months. So the question is how much would all the tools needed for commercial or residential HVAC cost? Total prices of low, mid, and high grade tools would help alot also! Thanks!

you should search high and low.....it is very expensive to gather just the basic tools to do this. i do craigslist and eebay and mutual friends getting out of it for the very thing we are discussing. if you are not smart about what to buy and when to buy it you will be scrounging for coffee money every friday. my best advice is to buy quality tools so you hopefully only have to buy them once.... heaven forbid you have to climb back into that attic and find your 50$ flashlight. the conditions of this trade weed out the mass's in quick and no excuses fashion.

It all depends which company you work for too, like with my company, all I bought myself is a basic set of hand tools (wrenches, pliers, screwdriers, nutdrivers) and they provide the service van and provide all the expensive equipment like power tools, gauges, vacuum pump, etc.

Will it be anywhere near as expensive as autotech?

prob equal

No. Maybe a grand to start. Most shops provide recovery machines vacuum pumps and specialty tools. After that to "Keep up with the Joneses" another 2-3k. I've been in the trade for about 15 years. and probably have 5k-6k in out of pocket tool cost. I like to buy tools that make my job easier.

Quote:

---

Originally Posted by samejj

prob equal

---

If you're on your own I can see 50k or more on tools. You've got 20k in the back of your truck? Love to see it. I feel like a bum with 6k

Quote:

---

Originally Posted by SkinnyBoi757

Will it be anywhere near as expensive as autotech?

---

i think your instructor might have told you prices for top of the line tools like snap-on, you could probably get by as an auto-tech with less expensive tools for a fraction of what your instructors tools cost.

As far as being an hvac tech, if you bought basic hand tools, a meter, and a bag to carry them in you could spend $200-$500 or more.

As I said before, my employer provides everything else. Some companys might not be so nice. If you had to buy power tools like a drill, impact driver, and sawzall; tubing tools like tubing cutters, flaring bar; and more tools to keep in the van like socket sets, pipe wrenches, hammer; my guess would be you'ld have to tack on another thousand, maybe more.

If you had to buy a gauge manifold, recovery unit, vacuum pump, tourches, and all the other special equipement, that could easily be a few thousand, but unless you are in buisness for yourself, i think almost all employers would provide these items.

Quote:

---

Originally Posted by Mike19

i think your instructor might have told you prices for top of the line tools like snap-on, you could probably get by as an auto-tech with less expensive tools for a fraction of what your instructors tools cost.

As far as being an hvac tech, if you bought basic hand tools, a meter, and a bag to carry them in you could spend $200-$500 or more.

As I said before, my employer provides everything else. Some companys might not be so nice. If you had to buy power tools like a drill, impact driver, and sawzall; tubing tools like tubing cutters, flaring bar; and more tools to keep in the van like socket sets, pipe wrenches, hammer; my guess would be you'ld have to tack on another thousand, maybe more.

If you had to buy a gauge manifold, recovery unit, vacuum pump, tourches, and all the other special equipement, that could easily be a few thousand, but unless you are in buisness for yourself, i think almost all employers would provide these items.

---

I'm kind of cheap myself, estimates from the other guys are probably more accurate.

I would say it all depends on what you plan on doing Residential, commercial, chillers, etc etc.
On my truck as is I have just under $30K and another $10-$15 in a job box ready if needed.
With the exception of centrifugal work I have most anything I need on my truck.
When I first started long ago I guess I prob had $600 - $900 out of pocket for doing mid commercial.

HI, I'm JP and I'm a Tool-Aholic.....


My daily Veto LC/MB setup and Digital manifold set would set you back over $3k to replace.

This doesn't count another $14-15k in other tools that I've purchased over the years.

waltervan nailed it. It depends on what you're doing.

A residential guy might never need a 1/2" socket wrench setup (shallow and deep well) with an 18" breaker bar and a 20-150ft/lb torque wrench. For a commercial guy, it's almost an everyday thing to grab that.

Also, as a newbie, you're not going to be expected to put up that kind of investment UP FRONT.

A fair selection of hand tools, a set of gauges, a thermometer and an electrical meter will get you started.

You'll add this or that as you go along.


Before you know it, you'll be going to Tool-Aholics Anonymous meetings.




:whistle:

Now that I think of it, digital thermometers and leak detectors, and the such maybe 8k or so.

jp, Are the digital manifolds that much better than a $25 Ritchie manifold, a digital thermometer and a PT chart? I just can't seem to pull the trigger. Maybe I'm stubborn http://i289.photobucket.com/albums/l.../confused2.gif

Just out of curiosity, what do your companies provide, and what are you responsible for buying on your own?