Ya actually it is its about a 1/4 inch over line ill remove some see how it does
thx
Printable View
Ya actually it is its about a 1/4 inch over line ill remove some see how it does
thx
I have a bad o-ring in my exhaust too, ang I am guilty of over filling my pump oil (damn thing takes forever to show full and I always over shoot the full-line.
I considered the TEZ pump from Appion, but the thing could wake the dead. And Its heaveer than my Robbie ...it does not pump down any faster than my Robbie either.
So why pay 800 bucks when my pump cost about 450????
Yeah, but i can do that with my Robbie too.
Changing oil on the fly is nothing new ....old rfeer dogs have been doing it for years.
Just need to isolate the system.
And the TEZ has a very small oil reservoir.....oil changes are very frequent where as my Robbie has a very large oil sump.
And if i used a TEZ on my resi jobs, the cops would arrest me for disturbing the peace. That thing is f'ing loud!
Don't get me wrong, I love my Appion products and they are a company ahead of the technology curve, but the TEZ is just not for me.
Can someone explain the best way to break the vacuum in these setups? My concern is damaging the micron gauge during a triple evac or charging. It doesn't look like you can isolate just the gauge if it is attached to the side port of the Appion CRT.
So can the fieldpiece
I picked up the yellow version of the LTE today. Now I know my Appion CRT leaks.....
I have been so disgusted with my micron guage and vacum pump holding a vacum for some reason just wont happen. I have been trying to eliminate some possibilitys. I will hook my vacum pump up to my manifold, then hook blue guage to micton guage and leave red hose on manifold. I can pull my micron guage down below two hundred microns then.valve off my blue hose and it starts climbing. Put in new rubber gaskeys in.hose. Guess it has to be the micron guage... Or could.the manifold be the problem. Usong the cheaper jb micron.guage
Are you guys using nylog on the bluevac fitting? I use nylog every where else just feel like I will contaminate the sensor if I use their.
JASON sent this from his DUMB-PHONE