Trouble Shooting Tips For A Perlick R-12 Unit
Hello,
I'm Working On A Perlick Draft Beer Unit And I Need Some Trouble Shooting Tips For The Compressor.
The Fan Will Come On But The Compressor Will Not. I Discovered That The Capacitor Was Bad I Replace It And It Did Not Start. I Trace Power To The Relay And I Need To Know How To Check The CSIR Relay To See If Its Bad And Also To Find Out If The Overload Protector Is Bad.
I Check The Compressor And It Seem Ok It Ohmn Out With Continuity On All Three Pins And I Even Check For Ground On Each Pin Nothing!
Please Someone Tell Me What I Might Be Over Looking?
Thanks