Put your email address in your profile please. I think we need to talk further about this.
Printable View
OK, I think I found my problem, first off, I found the phase monitor, it's NOT a Siemens, it's a circuit board about 3" square. Second, since I wasn't getting any help from Carrier, I thought I'd start looking in the scrolling marque to see if I could come up with something, after about an hour or so, I found it, I was in the "Temp" category and was in Circuit B and went to "Superheat" ,now remeber, circuit B is not running, and the superheat was 189*, I thought this was a little high:grin2: my suction gas thermister was out of calibration, it wasn't open or shorted, just out of calibration, I've had the alarm light on before when it was open or shorted, so I replaced the thermister and it runs great. I am going to send my board in and get it updated to the latest version. I want to thank all who gave me ideas and things to try.