I connected the gauges and have a pressure reading of 100 on the high side and 100 on the low side. What is most likely to be the problem?
Printable View
I connected the gauges and have a pressure reading of 100 on the high side and 100 on the low side. What is most likely to be the problem?
Is the compressor operating??
You must be a Pro* member to give technical advice.
Mod
You must be a Pro* member to give technical advice.
Mod
Put an amp meter on the compressor if its running. This might shed some lite on the situation.
:worthless:
:worthless:
wall of shame............
oh for shame, oh
Are the knobs on your gauges closed?????
Your fazignator is misadjusted
DLZ. I thought it would have been the kiniflin pin out of whack.
No core depressors in the hose ends