Reply to Thread

Originally Posted by Aravind56

hi anyone help me for network service tool software download

you can have the software, but its useless with out the hardware. the key is in the hardware.

hi anyone help me for network service tool software download

where i can download the nstv pls help me

hi anyone pls tell me which software used carrier chiller monitoring & upload software tool and where i ca get
if anyone have pls send software

Originally Posted by nBell464

I'm sorry to just jump in like this, but I've been looking for a software to interface with a Carrier 19xr machine. Does anyone know where I might be able to get that or what I need?
Thanks,

how do you want to interface with it? laptop or a bms system laptop you could use field assistant. A CCN router that is by IP. But thats most useful when using I-VU Or for bacnet bms by mstp you would use a UPC-OPN with the program loaded for your chiller version.

I'm sorry to just jump in like this, but I've been looking for a software to interface with a Carrier 19xr machine. Does anyone know where I might be able to get that or what I need?
Thanks,

Originally Posted by ryandavis

Looking for help with whether or not Network Service tool V and the usb to CCN converter are compatible with windows 8 OS? after I install the program with NSTV, I attempt to plug the usb converter in to install the drivers and nothing further happens, no dialog boxes for install or anything. When attempting to use connection manager to connect to a device, I receive "unable to validate product key)" . has anyone else come across this issue? If it is not compatible with windows 8 OS, does anyone know anyway around this besides reformatting with windows 7?????

It does and win 10. Email me for the program

Hvacbyday I know this is an old thread. I actually sent you an e-mail about a month ago and I am wondering if you can help with getting comfortview on windows 7. Hopefully you can help me out. thanks.

Originally Posted by Hvacbyday

yes, drop me an email ill walk ya through it

Good Morning Hvacbyday,
I would like to receive the information on how to configure CVIEW 3.2 to run on Windows 7 Enterprise.
Please send the steps to "frogoff@gmail.com".
Thanks for your support.

Looking for help with whether or not Network Service tool V and the usb to CCN converter are compatible with windows 8 OS? after I install the program with NSTV, I attempt to plug the usb converter in to install the drivers and nothing further happens, no dialog boxes for install or anything. When attempting to use connection manager to connect to a device, I receive "unable to validate product key)" . has anyone else come across this issue? If it is not compatible with windows 8 OS, does anyone know anyway around this besides reformatting with windows 7?????

yes, drop me an email ill walk ya through it

I know this was a while ago but do you know if comfort view can still run on windows 7?

Originally Posted by chill bill

Hi,
I have a 30RB0302 chiller. The EXV board is a 32GB500-422EE. When you purchase the board it comes empty & requires a
Carrier Tech to download the software. There is no plug on the actual board, so I assume they go through the CCN connection
on main board?

If you order the part with the number on the board it will come blank. If you order the board with the model and serial of the equipment it should come programmed for your specific equipment.

Just exchange the board if they are going to charge you. Worse case this way is a 15% restock.

Thought that might be the case. Which sucks! Thanks Gibbo.

ChillBill

I'm afraid your stuck with having to use Carrier Service to download the software onto your EXV board service tool is not used for downloading software. The program used is Winloader and the EXV files are issued to Carrier Service only in OZ.

Gibbo

Hi Bas,
Do the user manuals come with the Service Tool V kit? I bought the kit from the U.S a couple of years ago. Can connect to chillers to read operating data, but don't know how to do much more than that. For manual testing, I still go through the chiller controller.

Hi,
I have a 30RB0302 chiller. The EXV board is a 32GB500-422EE. When you purchase the board it comes empty & requires a
Carrier Tech to download the software. There is no plug on the actual board, so I assume they go through the CCN connection
on main board?

NSTV is not going to download to an EXV driver board the only benefit you will have is to see the EXV maintenance tables. What type of chiller are you working on there?

Originally Posted by chill bill

Hi Guys.
Does Carrier University have a course on using Service Tool v or is there information anyone would have explaining how to download software onto boards? I need to change a faulty EXV board, but I have to download the software onto the new board. Cheers.

I do not believe there is any specific training on Service Tool V. Do you have the users manual?

Hi Guys.
Does Carrier University have a course on using Service Tool v or is there information anyone would have explaining how to download software onto boards? I need to change a faulty EXV board, but I have to download the software onto the new board. Cheers.