Post a reply to the thread: KitControl ?
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Originally Posted by gazoo How would you set up a "StatusEnum To StatusBoolean" conversion? I have a schedule enum coming in but i cannot get the boolean output to change when i set the schedule from occup to unoccup or vice versa. kitControl/conversions/StatusEnumToStatusBoolean. ...why not use a schedule/EnumSchedule and set the Schedule Facets to use the Frozen Enum for lonOccupancyEnum?
We simply take the Schedule into a boolean select and define outputs of select.
thanks man......lots of sense now.....help manual in docs is very cryptic....
The active values are all enum values that you want to use to set the boolean output to be active. If your schedule is 0=UNOCC and 1=OCC, set the active values to be 1 only. Then anything other than a value of 1 will result in an output of false.
the active value represents what???
Originally Posted by gazoo i have my in facets as "LonOccupancyEnum" and my active values as occupied, unoccupied...the out stays true{ok} all the time...does not change.... with both occupied and unoccupied set as active when do you expect the output to be false? Kevin
i have my in facets as "LonOccupancyEnum" and my active values as occupied, unoccupied...the out stays true{ok} all the time...does not change....
Originally Posted by gazoo How would you set up a "StatusEnum To StatusBoolean" conversion? I have a schedule enum coming in but i cannot get the boolean output to change when i set the schedule from occup to unoccup or vice versa. Did you set your facets and active values? If that doesn't work, you can use a boolean select.
KitControl ? How would you set up a "StatusEnum To StatusBoolean" conversion? I have a schedule enum coming in but i cannot get the boolean output to change when i set the schedule from occup to unoccup or vice versa.
KitControl ?
Forum Rules
