Post a reply to the thread: Rack Systems in Low Ambient Conditions
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Originally Posted by jpsmith1cm I'm not going to engage in a battle of words with you. Best to not carry on in a battle of wits with an unarmed man.....
I'm not going to engage in a battle of words with you.
Originally Posted by jpsmith1cm I didn't call you out for not checking it, I called the attitude that "it's not worth my time" lazy. Don't miss quote me. That's your quote not mine. I said "Best to set it when you do start up. if its summer out and system is running it will be tough to set the A8. Bypass all your fans on and turn off a bunch of system circuits. See if you can creat a condition your head pressure goes below 180#. If not you won't be able to set it till cooler weather arrrives. During summer operation the A8 valve is not a factor anyway. A8 does nothing." So where in this quote do you see its not worth my time? "The A8 means nothing" part means that during summer operation it has no function not its not worth my time. I suggest things to try and you quote that as "its not worth my time" Your a moderator and now your miss quoting me as well as calling me out as lazy. Go have another beer...
Originally Posted by Phase Loss Are you calling me out?!!?
Originally Posted by jpsmith1cm pumps move fluid vapor is a fluid therefore, a compressor is a pump but, not all pumps are compressors. Are you calling me out?!!? Fluid Vapor is a slippery slope
Originally Posted by markettech Great responses! Ok.....now, how do you set an A8/A9 valve when the outside ambient dictates a higher SCT than your desired valve setting (summer)? Originally Posted by Fridge Repairer To theorize about how to set a low ambient valve in a high ambient condition is one thing this discussion was never about. Really?! Originally Posted by fridge repairer Your suggesting to the less-experienced on this website that it is routine to try to check and set a low ambient valve in a high ambient condition and that is dead wrong to do. Shame on you! Your suppose to be a professional of the highest level here. It can be done. I know it, jpsmith1cm knows it, Dowadudda knows it, Phase Loss knows it, several others here know it.....but you arrogantly refused to hear any more about it. Now you are trying to say jpsmith1cm is unprofessional and dead wrong for actually completing a service call before walking out the door? I know for a fact jpsmith is one of the most professional technicians you will ever have the privilege of interacting with. Too bad you choose to be blinded to some great information because you're focused more on being butthurt than on the topic at hand.
Originally Posted by Phase Loss but pumps move liquid and compressors move vapor when you compress liquid, you break compressors when you pump vapor, you cavitate pumps pumps move fluid vapor is a fluid therefore, a compressor is a pump but, not all pumps are compressors.
Originally Posted by Fridge Repairer Because your a moderator, I take great offense to your statement calling me out as LAZY for not checking an A8 valve in a high ambient condition. When was the last time you tried to set a low ambient valve in a high ambient condition? To theorize about how to set a low ambient valve in a high ambient condition is one thing this discussion was never about. Your suggesting to the less-experienced on this website that it is routine to try to check and set a low ambient valve in a high ambient condition and that is dead wrong to do. Shame on you! Your suppose to be a professional of the highest level here. I didn't call you out for not checking it, I called the attitude that "it's not worth my time" lazy. My comments aren't personally directed at you and I apologize if you took them that way. I have a HUGE problem with both the lack of training and knowledge and the lack of effort and craftsmanship put forth in this trade today. I just took a call today, well, a call BACK where I went behind a journeyman tech and PICKED UP HIS GARBAGE after I fixed the problem that he should have, as a journeyman, KNOW DAMNED WELL HOW TO FIX. So, maybe I'm just a bit steamed and it's coming across in my posting. Again, if you were offended, I apologize. We can have civil discussions about theory and techniques, but what we shouldn't EVER have is discussions about whether or not we should complete a job properly. In my opinion, if a technician isn't doing the job properly and making sure that it is done right before he walks away, that technician is a part of the problem. He either needs more training or he needs a boot in his backside. So, as we've explained, it IS possible and fairly simple to set an A8 valve even under higher than normal ambient temperature conditions. And, if you're anything like me and the other techs that I know, NOT setting that A8 valve, or at least making an effort to do so, is going to result not in a "check" visit when the weather gets cool, but a midnight service call when the weather gets COLD. Trust me. Been there, done that, froze my dangly bits off fixing it.
Originally Posted by jpsmith1cm Flippantly dismissing the idea of taking time to set the A8 valve during the summer because "the A8 valve is not a factor anyway. A8 does nothing." does strike me as a bit on the lazy side. Because your a moderator, I take great offense to your statement calling me out as LAZY for not checking an A8 valve in a high ambient condition. When was the last time you tried to set a low ambient valve in a high ambient condition? To theorize about how to set a low ambient valve in a high ambient condition is one thing this discussion was never about. Your suggesting to the less-experienced on this website that it is routine to try to check and set a low ambient valve in a high ambient condition and that is dead wrong to do. Shame on you! Your suppose to be a professional of the highest level here.
Originally Posted by Phase Loss but pumps move liquid and compressors move vapor when you compress liquid, you break compressors when you pump vapor, you cavitate pumps Bored today, Mathew?
but pumps move liquid and compressors move vapor when you compress liquid, you break compressors when you pump vapor, you cavitate pumps
Originally Posted by Dowadudda SCT = Saturated Condensing Temperature. Yes, the Valves A8/A9 refer to head pressure control very similair to a head master. Pump is slang for compressor. drop leg is liquid line leaving condenser. Thanks!
SCT = Saturated Condensing Temperature. Yes, the Valves A8/A9 refer to head pressure control very similair to a head master. Pump is slang for compressor. drop leg is liquid line leaving condenser.
This tread is outside of my area of expertise so please excuse my ignorance but I would like to learn more about commercial refrigeration. Could one of you please provide a simple explanation of what your talking about. I get that you're discussing head pressure control during low ambiant but I'm not familiar with the valves being discussed (A8,A9,ORD,OPR). I'm assuming it's a valving system similar to a headmaster condensor pressure control that effectively reduces the size of the condensor therefor increasing head pressure. Also, the term pumps has been mentioned several times in the same context of refrigerant. Are you referring to the compressor or some other pump? And what's a drop-leg and how does it relate to the head pressure control? And what's SCT? Is it sub-cooling temperature? Again, forgive my ignorance, but I would really like to understand this better.
can you. I don't know?
Originally Posted by Phase Loss ice cubes in the sump. It's all about the ice cubes Okay smarta$$........how's it done. Honestly, I've not had the opportunity to work on many evap condensers and am lacking in knowledge on some of the intricacies of things like setting up a HB valve on 'em.
Originally Posted by Dowadudda 17 is the available 1/4 turns in a typical parker holdback valve What about this? If there are 17 available 1/4 turns in a Parker A8 valve, and the valves range is 10"-400# couldn't you just stem it in, then calculate how many turns out till set point?
Originally Posted by Dowadudda I have been damn close with it Pat. Is it for sure dead balls. No. I mean I can't argue with ya there. Hey, I am saying, it shocked me too when I first was explained this. But I will be damned if it don't work. You're dead on, 4 D's. you and JPSmith seem to have basically the same process for setting the valve.....and I can't argue the idea that it will get you very close. As long as the end result is a properly dialed in HB valve - it doesn't really matter how one goes about getting there. For the record, I'm gonna try your method the next time and see what I think.....thanks for the info.
I have been damn close with it Pat. Is it for sure dead balls. No. I mean I can't argue with ya there. Hey, I am saying, it shocked me too when I first was explained this. But I will be damned if it don't work.
ice cubes in the sump. It's all about the ice cubes
Forum Rules