Post a reply to the thread: Digi Cool sensor mod......
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Originally Posted by tech45 Those part numbers will cross your eyes because there are so many. 708-1039-ND is the digikey number that I ordered ( back ordered ) , I wanted to wait until I recieved everything to post the numbers. 708-1093-ND for the pins. The plug will come apart and if you had new pins it may be worth the effort. I may re-use mine and shelf the other one along with the 6 pins I have left. 708-1039-ND is the same as PX0410/04S/4550. Did you receive them already, and are they the correct one? I am just going to buy them. I tried straws, not sure what I'm doing wrong but I can't get the stupid pins out.
The straw thing works on molex type connectors too
The straw idea is awesome. I fought through this today and finally got it. Time to work on some clamps next.
Originally Posted by itsiceman I think I was able to use a cut straw to get them out one time. Sorry its been a while since I beefed up the wiring..... it hasn't busted since That's where I went wrong.... I used a hammer drill , lol.
I think I was able to use a cut straw to get them out one time. Sorry its been a while since I beefed up the wiring..... it hasn't busted since
I got it apart, but apparently you need a tool to release the pins...
I'll see If I can find the invoice. Back ordered sounds strange.......I thought they had hundreds when I ordered
Originally Posted by chuckcrj What Digikey number did you get? Itsiceman posted this number; PX0410/04S/4450 But the closest I can find on the Digikey site is; PX0410/04S/4550 Are they the same? I want to know for sure before I order the wrong one. My temp clamp wires have been broke at the plug for a while and I need to fix it. I was going to take the plug apart and fix it, but I can't get it apart! It looks like once it is together, you can't get it apart without breaking it. Those part numbers will cross your eyes because there are so many. 708-1039-ND is the digikey number that I ordered ( back ordered ) , I wanted to wait until I recieved everything to post the numbers. 708-1093-ND for the pins. The plug will come apart and if you had new pins it may be worth the effort. I may re-use mine and shelf the other one along with the 6 pins I have left.
Originally Posted by chuckcrj What Digikey number did you get? Itsiceman posted this number; PX0410/04S/4450 But the closest I can find on the Digikey site is; PX0410/04S/4550 Are they the same? I want to know for sure before I order the wrong one. My temp clamp wires have been broke at the plug for a while and I need to fix it. I was going to take the plug apart and fix it, but I can't get it apart! It looks like once it is together, you can't get it apart without breaking it. The one on the 1200 is do-able, but fiddly. The 1250 is approximately the same plug, so it would be the same, I guess. Use a small flat bladed screwdriver and a bit of force. You can get it apart. What the heck?? It's already broken...
Originally Posted by tech45 I ordered the 4 pin Bulgin socket and pins today for my 1250 , thank you Iceman for those numbers ( and it takes a minute to convert those to the digi-key numbers , lol ). When ever asked about Digicool I will be sure to mention that as an owner of one of these " you will be involved with the manufacturing process " . Shaking my head holding a piece of soft blue wire that pulled out of a crimp connector * What Digikey number did you get? Itsiceman posted this number; PX0410/04S/4450 But the closest I can find on the Digikey site is; PX0410/04S/4550 Are they the same? I want to know for sure before I order the wrong one. My temp clamp wires have been broke at the plug for a while and I need to fix it. I was going to take the plug apart and fix it, but I can't get it apart! It looks like once it is together, you can't get it apart without breaking it.
TS-1140 clamps work like a charm on the AK900. Thanks for your help guys.
Thanks! I ended up useing 1/2 in for the high side, and 1 in for the low side. Works great, thanks for the idea. [B][/B] Originally Posted by abcando Great build on yours too JTC. I've used mine a few times and it's working great. Best part is you don't have to spend much to make it and no need to work on wiring or soldering and such. I noticed you used a smaller pipe for your high side sensor. Looks good!
Originally Posted by JTCHVAC I took this idea from abcando and ran with it. I got to use it today, I really like how they work, and I like that fact that if you walk away from the unit then come back the sensors are right where you left them. Great build on yours too JTC. I've used mine a few times and it's working great. Best part is you don't have to spend much to make it and no need to work on wiring or soldering and such. I noticed you used a smaller pipe for your high side sensor. Looks good!
Ok , so I'm thinking of the intro to the old tv show " The Six Million Dollar Man " ( I wont complain any more , we can rebuild this , etc. ) ....any specific advice on soldering wire to those tiny gold pins would be much appreciated. Any other specific problems with that connector ? The 1/8 rca jacks...I'm assuming " mono " jacks are used ( male and female ) ? Im going to search out those next ...any wire recomendations (I've constructed plenty of guitar cords in my time but they were 1/4 inch , lol ) ?
Shrink tubing is your friend.
I ordered the 4 pin Bulgin socket and pins today for my 1250 , thank you Iceman for those numbers ( and it takes a minute to convert those to the digi-key numbers , lol ). When ever asked about Digicool I will be sure to mention that as an owner of one of these " you will be involved with the manufacturing process " . Shaking my head holding a piece of soft blue wire that pulled out of a crimp connector * facepalm.
Originally Posted by filiberto Now I get it. Great set-up 'hvac wiz 79'. I am going to order a set of the TS-1140 clamps and copy you exactly. Looks like the best solution for the AK-900. Thanks. It works great so far & I'm constantly encountering guys on mall roofs who think it's made & shipped looking like the way i have it. Hell their just amazed by a digital display lol
Now I get it. Great set-up 'hvac wiz 79'. I am going to order a set of the TS-1140 clamps and copy you exactly. Looks like the best solution for the AK-900.
I took this idea from abcando and ran with it. I got to use it today, I really like how they work, and I like that fact that if you walk away from the unit then come back the sensors are right where you left them.
Originally Posted by filiberto I have an AK-900. Will my AK-900 thermistors fit inside the TS-1140 clamps? Or are they different sizes? I have never seen a closeup of the sensor used inside the TS-1140 clamps. Seems as though it's the same thermistors that ship with the ak900. Also seems extremely simple to replace just the sensor if it ever goes bad
Forum Rules