Post a reply to the thread: York YCAS250 Microprocessor Help
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Right on!!! Glad it worked!!!
The code Klove gave is the correct one if you changed the micro board or expansion module you will need the set the motor protection info. back up as you are already experiencing problems due to that.
We got a winner. 5144. Thanks for the info guys.
5144
I got rained off the job. I will let you know if any of those worked. Thanks for the info.
try 5144, i keep looking at the numbers on the phone to remember the sequence.
or try 5422, i am real close.
There is a another secret code and i am trying to remember it as I type. This code will get you into the screen you need, i then right down the specs on the inside of the panel. Try 5244??? Get right back to me and let me know, i'm starring at my phone trying to remember.
York YCAS250 Microprocessor Help Installing a new board in chiller. I tried to program the 21 different menus and can find only 14. The chiller will run a comp for about a min. and then go off on over amp because one of the menus I cant find is motor current setting. Do I need to set a dip switch to get to these additional 7 menus? I have used the password given in the IOM (7396) and also the York password (9675). Still cant find.
York YCAS250 Microprocessor Help
Forum Rules