Reply to Thread

So I was in Sears the other day and I discovered that all of the stuff that used to be made in the US is now made in China or Taiwan. Looks like I am shopping for a new tool brand, and I'll be swapping out my Craftsman stuff for something else. I'm not going to have one of my US Craftsman tools break on me, and get handed a Chinee replacement when I take it back to Sears.

X2 for going to Johnstone at the beginning of the month.

northstarair, thank you for posting that list, there are a few things that I would not thought of.

This is a list that my company provides to everyone:

Vacuum cleaner
Pump-up sprayer/coil gun
manometer
inspection mirror
3/8 drill
tin snips
jumpers
fuse puller
furnace brush
hacksaw
scrath awl
grease gun
screw extractor/easy out
allen wrenchs
saws all
adjustable wrench (6" and 10")
pipe wrench (8" and 12")
channel locks
nut drivers
combo wrenches
socket wrenches
crimper
vise grips
lineman pliers
needle nose pliers
tape measure
extension cord (50ft)
drop light
flashlight/lantern
hammer (sheet metal or claw)
screw drivers ( 4"/6" flathead and #1/#3 phillips)
manifold/gauges
pulley puller
refrigeration wrench

and if you do oil:
smoke gun
draft gauge
oil pressure gauge


now, obviously, this is an incomplete list and can be added to, but as far as hand tools, i think it covers most every base

One thing you may consider is to look at a few technical school sites and see if they have a required tool list and see what is on it. After looking at a few of those lists go out and look to see which brands YOU like best since tools are kind of a personal thing. Usually those lists will at least give you a good start.

yellow jacket gauges
milwaukee hammer drill and impact 18v
snapon #3 and #2 screw drivers
Klien 11in1 with schrader bit
klien multi stubby
klien crimpers
klien strippers
big and small service valve wrench
txv service wrench
4" 8" 10" klien extra wide jaw adjustables
3/8 drive american sockets craftsman
1/4 drive snapon socket set american
3/8 ratchet and extensions craftsman
snapon 1/4 ratchet and extensions
snapon channel locks
klien linesman
plano box with misc wire nuts and ****
fluke 902
schrader tool with tube to store extra cores
snapon needle nose
greenlee dykes
channel locks
mirror
flashlight
stryker
turbo torch 8,11,14,32 tips (32 tip was a pretty penny..thanks for the tool account)
tape measure
snapon #1 and the size smaller than #1 screwdrivers
craftsman ratchet wrenches american
yellowjacket UV leak detector
lenox imp cutter up to 5/8 and imp cutter up to 1 1/8
ridgid 1 5/8 cutter
file
ridgid adjustable orange handle hex wrench 8" i think
long hollow shaft magnetic klien nut drivers 5/16 1/4
torpedo level

i need a piping bag.


dont forget the most important tool...the tool bag! veto propac LC
i still end of needing something more during the week. but i just got my license 4 months ago in ct with my D2 but start with a tool bag, screw drivers, make sure you get extra wide adjustables, strippers, channel locks, 11in1 is awesome.

I've always been told if you purge the lines, you're good to go, and thats how I. Hook em up, purge em. But yes, it would be ideal to have a different set for each. Everyone in my company does that with analog, but they use 1 set of digitals for everything

Originally Posted by Rustytool

Northstarair, you said gauges that will do r22 & r410but I was taught never to use the same set of gauges with different refrigerant because you can contaminate the system. Is there a process to clean out the old freon or was I taught wrong? Just asking for my own knowledge.... I have only been in the field about a year and a half now and am just trying to learn everything I can.

This is a heap of mud.

It is an old tale that has resulted from some of the massive amount of MISinformation that is out there.

I have 2 manifolds in the truck and both of them have seen mineral, alkylbenzene and POE oil, at least one has also seen PVE and PAG oil.

The list of refrigerants is quite long. R-12, 134a, 22, 401a, 401b, 402a, 404a, 407a, 407c, 410a, 502, and 507 are just the ones that I can remember.

Normal practices of purging gauges on connection will prevent contamination.

Northstarair, you said gauges that will do r22 & r410but I was taught never to use the same set of gauges with different refrigerant because you can contaminate the system. Is there a process to clean out the old freon or was I taught wrong? Just asking for my own knowledge.... I have only been in the field about a year and a half now and am just trying to learn everything I can.

I started out back in May. Best tools to get are a 6in1 or set of screw drivers. nut drivers, both short and long, preferably magnetic. since we're getting into AC season, I'd recommend a leak detector. my company bought the TIF, and I'm thinking about adding an infrared to my arsenal as well. Guages are a must, one that does both 22 and 410. A decent meter. I had a craftsman pro, because thats what my budget alotted me, and when i bought it i was working at sears so i got a discount. i have some good wire strippers, side cutters, a paint brush for cleaning out dust and webs from condensers.

and soon enough i'll be getting torches, a vacuum pump, recovery machine, digital manifold, combustion analyzer. the joys of seeing all my cash disappear into my tools

Originally Posted by tinnerjohn

Another source for tools you don't need "right now" are flea markets. I've collected several Rigid pipe wrenches and other old name American made hand tools at bargain prices. Just need to know what they cost new and what they are worth to you before buying. I've seen some people overprice stuff, but I don't have to buy it if I don't want to. Good Luck in your career. John

Great idea. I picked up a pair of like new 24" aluminum Ridgid pipe wrenches for $20 each from a tool re-seller at a flea market. I've also gotten an air/acetylene torch, taps & dies, and all kinds of other goodies from flea markets over the years.

when I started school I had to get a bunch of tools before the school would let me begin. I went to home depot with a tool list from school and got everything needed, with exception of manifold and dmm from johnstone. then I discovered this site and have been lurking for a while, reading a lot about tools. I still have my original tool bag, keep it in my truck, but im about 90% done with a second set of tools. my second bag is all the cool tools ive discovered from reading tool threads here. I get comments daily about the tools classmates and even teachers don't know about, like hvac strap, valvecoretool.com tool, nylog, and even my veto.

Thanks for the responses guys! this has been alot of help, and I'm sure others that search the same question will be benefited by this as well.

Another source for tools you don't need "right now" are flea markets. I've collected several Rigid pipe wrenches and other old name American made hand tools at bargain prices. Just need to know what they cost new and what they are worth to you before buying. I've seen some people overprice stuff, but I don't have to buy it if I don't want to. Good Luck in your career. John

On the first of every month I would go to Johnystone and get the circular ad. Most of my hand tools are from there. Trutech tools online have some good deals and you get them quicker sometimes that when you order from the supply houses.

Start small and build your tool collection as you can afford it.

I started with a few Craftsman wrenches, a Craftsman socket set, some WalMart Screwdrivers that I was given for Christmas, a YJ41 manifold set and a Fluke 52.

My current tool inventory would stock TWO trucks better than my first truck was stocked with tools and probably start stocking a third.

A thing that I do to afford tools even today is to deposit a small amount of money each pay cycle into an account. This is my tool fund.

I agree with 2sac craftsman klien channel lock and crescent hand tools but im a fieldpiece guy when it comes to meters and i will only buy yellow jacket guages and micron gauges and scales uei makes a good dual input manometer and i love my supco megaohmmer

I'm going to come at you from a different angle. When you first start out, it is best to just have the tools. You can buy the quality as you can afford it.If you can afford it now, all the better. Personaly, The only cheap tools I own are ones I found, but I undertand the need for some of the younger guys to budget their money. Stay away from battery operated Crafstman tools. Their batteries are garbage.
My brand preference for hand tools are: Craftsman, Klein, Channel Lock and Crescent
meters: Fluke
battery and electric powertools: Milwaukee

A meter and a 6&1 can get you started

I recently got a new helper for installs who went to lowes and bought kobalt tools and a bag and he pretty got most every hand tool you could need for under 200 dollars. Now that being said they are not of great quality but as far as screwdrivers and random things like that that don't really need to be dependable they work fine. As far as duct tools malco and Midwest is my preference. I have craftsmen sockets and wrenches that hold up great. Invest in a good drill/driver set. I would recommend dewalt or Makita. if you need other things as the job requires, just post a thread asking opinions or what brand or type you should get. There are plenty of members here who are quick to help and share opinions. x2 on the klein tools. wire strippers, nut drivers, side cutters, cable cutters(for large wire) and crimpers are very nice and you will not be disappointed in the investment.

I've been doing residential installs as an apprentice for roughly a year now and this is what I have in my bag of hand tools.
Red & green snips
Philips & flathead screwdrivers
Nut drivers
Malco hole cutter
Speed square
Flanging pliers
Assortment of open/box wrenches
Linesmen
Channel locks
Wire strippers
Schrader/ thermostat scredriver
Utility knife
Insulation staple gun
Claw hammer
Sheet metal hammer
Pry bar
Multimeter
Tubing cutters
Head lamp
Flashlight
Strap gun
Allen set
Impact / drill combo
That's the stuff I pull out of my trunk and put in the work truck every morning.
My company provides a torch, vacuum pump, right angle drill, hole saws, nitrogen tanks, etc..

Buy the best quality you can because at the end of the day you get what you pay for, and also
MARK EVERY TOOL YOU OWN!!! I learned the hard way that tools tend to grow legs!