Reply to Thread

How to get config from York IDC controller to CX-IDC controller?

I support a York IDC controller (SW rev UCS UDC 5B) at my church. I purchased a CX-IDC controller (SW rev OCS UDC 1) to serve as a standby backup controller in case the IDC controller fails. I now need to configure the newly acquired CX-IDC controller with identical functions as those that are in the currently operating IDC controller. I have IcE (rev 1.08.0010) and have downloaded the configuration from the IDC. I have also created a new configuration in IcE using a OCS UDC ver 1 template, for eventual uploading to the CX-IDC.controller...................However, I have noticed that the OCS UDC ver 1 template within IcE has a few differences within the functions from those that are in the configuration downloaded from the IDC. Can someone let me know what is needed to get the CX-IDC controller configured identically to the currently operating IDC controller?
Thanks

https://www.dropbox.com/sh/7lwb9wm1h...LT8d6ooma?dl=0
Ice software use launcher.exe to install good luck

Hi unfortunately this is another request for the Ice installation software, our controller PC has been infected by ransom ware and we have the York control installation media but not the Ice, is there anybody that can still help?

Thanks

Alastair

York ISN software

Originally Posted by benich

IcE 1.08 will do the best install it was the final chapter of IcE software

You posted this a few years ago. I've been asked to keep an old system running for a nonprofit while they look for other solutions. I've found a manual for the keypad with some operating info, but would like the IcE software to hook in and see how things are set up. I have old passwords, and what appears to be a dongle.

Anything that will expand my limited knowledge would be much appreciated

John at omearas do net.

Thanks

HMSPete or pideedoff, Could I get a copy of the software from you?

I have it now, many thanks, will try it out tomorrow...

Fingers crossed!

Peter

Oh, that's the problem, it had my old email address. I've updated it.

I used the email from your profile? I'll try again....

I haven't gotten your dropbox info yet

I have sent you a link to my public Dropbox folder, could you put it in there please?

Peter

Ok, It's 95 mbs, how do you want it?

Is there any chance of sending it to me, it would be greatly appreciated,

Thanks in advance,

Peter.

I just found a copy of ICE 1.03

As per the last couple of messages, although this is an old thread I too require the software mentioned. A client has a York system which requires a few tweaks and this software is almost impossible to find. Any help out there..?

Many thanks,
Peter

Sorry to bring up an old thread, but if anyone has a copy of this software it would be greatly appreciated,

Thanks in advance,
Darrel

Really sorry to bring this up again....but is there anyone who could copy me across a version of this software?

Much appreciated!
Pete

Originally Posted by Clott217

Thank you.

Hate to bring up an old thread, but if anyone has a copy of this software it would be greatly appreciated,

Originally Posted by Fiz

I am on the road at the moment if heavyevens doesn't get back to you
PM me.

Thank you.

I am on the road at the moment if heavyevens doesn't get back to you
PM me.

Originally Posted by Clott217

Hello heavyevens.

Is there any way I can get a copy of iCe . I have an existing building that has the isnMODlinc to an NAE. customer is waiting for an upgrade(that they have already purchased) or I would replace with something better. My problem is the modlinc is communicating but valves are not updating. not sure if I need to reconfigure the MODlinc or not. Is iCe the software to configure the MOdlinc. Any help would be appreciated.

Hello heavyevens.

Is there any way I can get a copy of iCe . I have an existing building that has the isnMODlinc to an NAE. customer is waiting for an upgrade(that they have already purchased) or I would replace with something better. My problem is the modlinc is communicating but valves are not updating. not sure if I need to reconfigure the MODlinc or not. Is iCe the software to configure the MOdlinc. Any help would be appreciated.