Post a reply to the thread: To much wrong with this W/H
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Aside from not being secured to the draft hood and not having the listed firestop, the B-vent was installed upside down. Unfortunately, I find abortions like this all too often.
Originally Posted by dandyme that's one way to get that pesky draft hood to stop leaking CO This was my first thought. Blocking the hood actually made it safer. Plenty of other problems though.
Originally Posted by sweat hog Ours a called "lockout tags" The company gets for us so I dont know where. Google on "Lockout Tagout" and you'll find a bazillion of them... well maybe not quite that many, but lots for sure...
Originally Posted by Wheelbaron I need to get me some Red Tags for HVAC, any ideas where to buy them? Ours a called "lockout tags" The company gets for us so I dont know where.
What's wrong with it? You guys are way too critical. It's probably been like that for years.
Originally Posted by shavedneon OMG, Found this gem the other day. The picture should speak for itself. Wow!
Originally Posted by sweat hog I keep a red tag sticking out of the front pocket of my coveralls. Seems to keep me from seeing chit like this. I call it "open carry". I need to get me some Red Tags for HVAC, any ideas where to buy them?
Water heater?....lol....that's an IED.
Originally Posted by shavedneon OMG, Found this gem the other day. The picture should speak for itself. I keep a red tag sticking out of the front pocket of my coveralls. Seems to keep me from seeing chit like this. I call it "open carry".
speechless...
Originally Posted by DLZ Dan Nice picture! I usually wear a ball cap while i'm working, no one ever breaks your stones about the tiara? The 3 year old granddaughter's, she's the helper...
Originally Posted by DLZ Dan Nice picture! I usually wear a ball cap while i'm working, no one ever breaks your stones about the tiara? Had to look twice...
Originally Posted by enb54 How's this one? Hot water pressure was very low, two 40 gal gas fired water heaters run in series, the outlet from heater 1 to heater two had deposit about 1/4" thick, both thermostats nearly maximum. Cleared debris by using CLR to dissolve, then set heater 1 at 110F output and heater 2 at 140, everything is fine now... Nice picture! I usually wear a ball cap while i'm working, no one ever breaks your stones about the tiara?
Originally Posted by shavedneon OMG, Found this gem the other day. The picture should speak for itself. How's this one? Hot water pressure was very low, two 40 gal gas fired water heaters run in series, the outlet from heater 1 to heater two had deposit about 1/4" thick, both thermostats nearly maximum. Cleared debris by using CLR to dissolve, then set heater 1 at 110F output and heater 2 at 140, everything is fine now...
that's one way to get that pesky draft hood to stop leaking CO
Where do I begin to tell the story of a .... Some things you wish you hadn't seen. Looking at that makes me think they didn't care what you had to say about it.
To much wrong with this W/H OMG, Found this gem the other day. The picture should speak for itself.
To much wrong with this W/H
Forum Rules