Post a reply to the thread: Gibson two stage 60/80 locking out
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Good point, it was in the house when I bought it.
Originally Posted by muskey Just hate to spend money on a 6 year old gibson funace to find it was the wrong part.When I can buy a new funace at cost and install it. ...if you really are in the trade, why do you have a Gibson?
Yes I had some fun with the site think I will look around to see who I can help.
Originally Posted by muskey AAHH sweet success, all I needed to do was remove my hands from my pockets, get out some tools and meters.The vent is boarder line but ok ,found the high fire pressure switch had some resistance when closed causing some confusion on the board.This only happened when calling for high fire, so low fire for now until new switch installed. Nice work in finding the problem.
AAHH sweet success, all I needed to do was remove my hands from my pockets, get out some tools and meters.The vent is boarder line but ok ,found the high fire pressure switch had some resistance when closed causing some confusion on the board.This only happened when calling for high fire, so low fire for now until new switch installed.
Thanks rundawg I was being lazy,guess I will get out the special effects (tools) and have a real look at this thing
Originally Posted by muskey Both its my house. Fitter 1, obt 1,Refrigeration.(35 years)The problem is don't work on res. at all. I can read about the pressure swithes and light blinking and wiring diagrams.But its not a consistant problem.sometimes it lights and then not, I think its the board with the top light blinking while it is firing sometimes.Just hate to spend money on a 6 year old gibson funace to find it was the wrong part.When I can buy a new funace at cost and install it.Thanks for the feed back and I hope I posted in the wright area. Six years isn't that old. Before you condemn the board or the furnace, I would get a manometer and VOM out and see if that High pressure switch is seeing the required pressure listed on the switch. You could have a venting issue causing the pressure switch to open on occasion. Might be an easy fix. Keep posting, and get yourself into the pro forums.
Both its my house. Fitter 1, obt 1,Refrigeration.(35 years)The problem is don't work on res. at all. I can read about the pressure swithes and light blinking and wiring diagrams.But its not a consistant problem.sometimes it lights and then not, I think its the board with the top light blinking while it is firing sometimes.Just hate to spend money on a 6 year old gibson funace to find it was the wrong part.When I can buy a new funace at cost and install it.Thanks for the feed back and I hope I posted in the wright area.
Originally Posted by muskey Hello all this thing is 6years old the last 2 it keeps looking out, maybe 6 times per year (no snow, air switch checks,drain clear) two light blinks . any ideas? O.K. I'll bite. But first a question, are you a home owner or technician? As I'm sure you know, this forum doesn't give out troubleshooting info to home owners. If you are a technician, what troubleshooting have you done up to this point? From your description, it sounds like the "add-on control board" LED is the one that is blinking. 2 flashes of this LED has to do with Pressure Switch issues. If you are a homeowner, I would call a service company out to look at your unit. I'm sure they will be able to review the installation of your unit to see if it was done correctly, and then easily troubleshooting the reason for the occasional lock outs. If you are a technician, get your post count up, apply for membership, once accepted, come into the Pro Forums for info on troubleshooting these pressure switch issues. That is the best I can do at this stage.
Well thing locked again today looks like it maybe the board anyone work on these units and know the quorks?
Model# KG6TE-080C-VB Have noticed the top light marked ANI on the board will flash sometimes when unit is running?
Gibson two stage 60/80 locking out Hello all this thing is 6years old the last 2 it keeps looking out, maybe 6 times per year (no snow, air switch checks,drain clear) two light blinks . any ideas?
Gibson two stage 60/80 locking out
Forum Rules