Post a reply to the thread: hoshi DCM270BAH wiring question
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Call Permul at 1 800 567 4432 this isnt tech support but they will give you a number to call best of luck
hoshi DCM270BAH wiring question I pulled out the gear motor/evaporator assembly to clean and rebuild it. The wiring diagram was hard to read so I thought I would be clever. I cut the wires at the connectors leave short stubs of color so I would know which wires connect to each other. The gear motor has 4 wires coming out. The guys in the shop reorganized the workbench for me and I found 3 of the factory connectors. orange and yellow, red and grey, black and violet. The only other wire I cut was the neutral where it comes through the strain relief and did not cut the black. Based on the wiring diagram it looks like the blue should connect the the neutral (white). Can anyone confirm this or tell me otherwise? there is a place in hell for people who mess with the work area when you have something torn down....
hoshi DCM270BAH wiring question
Forum Rules
