Post a reply to the thread: digicool ak900 leaking hi side valve
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
There is a Allen screw in each end. Tighten down on the high side one just a bit. Not much, maybe a quarter turn. This should take care of the issue.
digicool ak900 leaking hi side valve I was charging r410a liquid into the high side after evacuation, so I had it wide open my manifold was really cold just about frosty, after I close my hi side valve on the manifold i remove my common hose off the tank as its hanging I see my manifold start to ice up its bleeding through. has anyone had to replace the seals inside there ak900 yet???? im a little disappointed, it happened on my last call Friday maybe come Monday it had time to warm up and soften up to reseal. I think since it got so cold the gasket got hard and couldn't seal properly ill see.
digicool ak900 leaking hi side valve
Forum Rules
