Post a reply to the thread: Hammer Pin Metal
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
Dave, I bought a lockformer for $250 about 10 years ago and still using it today. The guy had bought it with a bunch of other stuff and had no idea what it was. My dad was with me and got him to take $250 for it, he was asking $350 and I would have paid it.
Originally posted by tinman Check with a steel company for a piece of high carbon steel plate. Maybe you can find a scrap saw from a sawmill. Chunk that to the size you need. I've never cared for hammer pins. A used pinspotter can be had fairly cheap. I'll second that. I got a Durodyne pinspotter in near new shape, with about 25 lbs of pins and plates for 50 bucks. Guy didn't know what it was.
yea you could get a plate and have it heat treated....around here, the railroad is forever tearing the tracks out of the busiest intersections, maybee you could get a piece from thier road crews or a scrap yard...recycling yard ...if you have one of them around
Check with a steel company for a piece of high carbon steel plate. Maybe you can find a scrap saw from a sawmill. Chunk that to the size you need. I've never cared for hammer pins. A used pinspotter can be had fairly cheap.
I need something that will work for using Cain hammer pins on commercial job sites. I have tried stainless steel and flat plate metal but it is not hard enough. I worked for a guy years ago that had a train track rail upside down built into his insulation table but I am looking for something that would work to make the whole tabletop useable. Have you got any ideas?
Forum Rules