Post a reply to the thread: vacum setup
You may choose an icon for your message from this list
Please enter the name by which you would like to log-in and be known on this site.
Please enter a password for your user account. Note that passwords are case-sensitive.
Please enter a valid email address for yourself.
Will turn www.example.com into [URL]http://www.example.com[/URL].
i dont see why not i am going to a tee with 2- 3/8 flare tee that will go directly into my pump. at the moment i have a 1/2 to 3/8 reducer on my new JB 7cfm
My vacuum pump has 1 1/4 and 1 3/8 port is there any reason I couldn't use this instead of the $65 dollar tee yellow jacket has http://www.sears.com/lasco-plumbing-...SPM10753062719
2 Valve core removal tools, 2 half inch hoses one on each side of system, and directly teed to vacuum pump and with a micron instrument. Nothing too spectacular just good old fashioned evacuatin' Sent from my Nexus 5 using Tapatalk
What is used to connect the two hoses directly to the vacuum pump
Not sure I'm just doing start up we have some real smart guys on install crew Sent from my SAMSUNG-SGH-I337 using Tapatalk
Originally Posted by Utahjohn Been using this 2- Appion 1/2" hoses 2- Appion vcrt's 1- yellow jacket evac 2 (blu vac) Super fast and now I know if the system is holding will never use a manifold again.Attachment 484461Attachment 484471 Sent from my SAMSUNG-SGH-I337 using Tapatalk WTH's with mounting the disconnect to the damn service panel???
Very nice! Time for a beer?
Been using this 2- Appion 1/2" hoses 2- Appion vcrt's 1- yellow jacket evac 2 (blu vac) Super fast and now I know if the system is holding will never use a manifold again.Attachment 484461Attachment 484471 Sent from my SAMSUNG-SGH-I337 using Tapatalk
Looks like a nice set. I'm still thinking, still trying to evolve into an e-vac set-up that doesn't cause me tantrums, fits of cursing and hours of frustration looking for non existent leaks. I want a vacuum pump that'll suck the nuts off a squirrel at fifty yards and I can judge whether the job is done when the copper starts to collapse! Evac drives me nuts!
Originally Posted by valdelocc I dont need it cause I get paid by the hour Ha!
I use this one. Yellow jacket 60971
So I could have saved $10 and bought one. So if blue is universal I like the RED one better so I can use this on all oil types?
Originally Posted by gravity You're being ridiculous. I've used it for 3 years now with no trouble. No offense was intended...just curios if you had information that differed from what I have read concerning cross contamination.
http://refrigtech.com/Product/Sealan...ylog_blue.html The Blue Label Nylog can be used universally or specifically with an HFC bound synthetic oil system. http://refrigtech.com/Product/Manuals/NylogManual.pdf Blue Label is completely miscible in POE or PAG lubricants and exhibits good stability in both mineral and alkyl benzene oils Links to and quotes from the manufacturer's information on Nylog. Relax, dude.
Originally Posted by chuckcrj Nylog for HFC is based on POE oil. As we know, POE oil is miscible with CFC, HCFC, and HFC refrigerants. So yes, the HFC Nylog is compatible with any refrigerant. This.
I went to the website and it explains a lot. Says use blue stuff for everything if you want. Like gravity said, lot less tacky. Doesn't seem to clog up as much. Also says to use it under and over teflon on pipe threads. Has anyone used it for this purpose? As a pipe thread compound that is.
Nylog for HFC is based on POE oil. As we know, POE oil is miscible with CFC, HCFC, and HFC refrigerants. So yes, the HFC Nylog is compatible with any refrigerant.
Originally Posted by hvac5646 Unless you have some documentation I have not, I would not be willing to go on "Faith-alone" just because it's a miniscule amount. I'll have to agree with gravity. The above quote is just ridiculous! Miniscule amount for what? Are you putting the bottle in the system? Is leak lock compatable? sent from my Samsung Galaxy Note
You're being ridiculous. I've used it for 3 years now with no trouble.
Originally Posted by gravity It is a drop of nylog. It ain't gonna hurt nothing. Unless you have some documentation I have not, I would not be willing to go on "Faith-alone" just because it's a miniscule amount.
Forum Rules