Reply to Thread

good point i always make sure to do that with units in hung cielings, guess i didnt think about it too hard under the deck

So, if you're not terminating the vent for the drain above the level of the float switch, what happens when the drain clogs downstream of the vent? The water pours out of the vent before it has a chance to trip the switch. We always terminate above the height of the primary pan, even if it means drilling another hole in the deck.

Outdoor service outlet, nice.

Originally Posted by Brent Ridley

No clean out for the trap? Good thing you added a float switch cause it's gonna need it without a clean out on that trap.

Savanna GA huh, im from screven county, right inbetween savannah and augusta

Originally Posted by gravity

where does the vent pipe from the trap go?

tubing looks good outside.

Its just a little bit long, its open right under the deck, preciate it

Originally Posted by Brent Ridley

No clean out for the trap? Good thing you added a float switch cause it's gonna need it without a clean out on that trap.

Lol yeaa figured somebody would ask about that, i had another tee but didnt have a cap on hand soo i didnt glue the 90 going down

Put the drier inside. Never rust out in the house..

No clean out for the trap? Good thing you added a float switch cause it's gonna need it without a clean out on that trap.

where does the vent pipe from the trap go?

tubing looks good outside.

Moved an AH to diffrent location in home

Attachment 335341Attachment 335351Attachment 335361Attachment 335371Attachment 335381Attachment 335391


Just a little side job.. All new copper and drainline inside and out. duct work and the whole 9 yrds